Notices
The Classifieds GraveYard Where old classifieds threads go that are too good to let go

Parting out 83 pickup

Old Dec 18, 2012 | 03:21 PM
  #1  
1stgenrnrdude's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 593
Likes: 0
From: Leesburg, VA
Parting out 83 pickup

Name:Collin
Location:Ashburn,VA
Description:

**TRUCK IS SOLD**

I recently bought this truck off an old friend. I was originally planning on taking the solid front axle parts off for my 88, however i recently sold my 88 so i have no use for this truck. He daily drove this thing for a year or two then a few months back the motor started making a "bad noise" and he turned it off before it made anything worse(he said oil pump, i have not verified that yet, it sat for months and has some rigged starting system with speaker wire going to the starter:face palm: ) The bed is toast, the cab is decent i suppose it has a few patches on it where rust was and it is rusted a bit below the doors. Motor is a 22r, it is a 4wd truck. It has power steering, i think everythings there i will double check tomorrow. fenders are in decent shape as is the hood and doors. it has the "vented" windows. Frame is decent, does have a little rust tho and front shock mounts are broken off. it has a small body lift on 33 generic tires. has aftermarket wheels as wheel(polished wagon wheels) i believe 15x10's. not much left of the interior, does have nice seats though(not sure what they came out of they are tan/brown) i will get pics up asap, trying to part the big stuff last(wheels, axles) however if i get a very serious buyer for those i could remove them. i would prefer not to ship the big stuff however if the buyer wants to pay shipping, i will possibly ship. If someone is interested in the truck as a whole, feel free to make me an offer. again i know this thread isn't worth much without pics so i will try to get some up tomorrow. Pm or post if you have any questions.







thanks

Collin
Attached Thumbnails Parting out 83 pickup-83-1_zps22d4142e.jpg   Parting out 83 pickup-83-2_zps426ddcf3.jpg   Parting out 83 pickup-2012-12-22_14-38-05_558_zpsb8d7e168.jpg   Parting out 83 pickup-2012-12-19_12-51-33_119_zps5358666c.jpg   Parting out 83 pickup-2012-12-19_12-50-31_556_zps5365e35b.jpg  


Last edited by 1stgenrnrdude; Apr 28, 2013 at 03:30 PM.
Old Dec 18, 2012 | 03:44 PM
  #2  
sirsmitty1003's Avatar
Registered User
 
Joined: Sep 2012
Posts: 20
Likes: 0
From: Fort Worth, TX
I am interested in the rear fender extensions, how much for both?
Old Dec 18, 2012 | 04:23 PM
  #3  
1stgenrnrdude's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 593
Likes: 0
From: Leesburg, VA
I'll double check the condition of them tomorrow and send you pics if you'd like. are you talking about the rear fender "flares"?
Old Dec 18, 2012 | 06:10 PM
  #4  
sirsmitty1003's Avatar
Registered User
 
Joined: Sep 2012
Posts: 20
Likes: 0
From: Fort Worth, TX
Okay sounds good and yeah flares is what I was talking about
Old Dec 22, 2012 | 01:21 PM
  #5  
1stgenrnrdude's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 593
Likes: 0
From: Leesburg, VA
pics added, returned all pm's
Old Dec 22, 2012 | 01:36 PM
  #6  
99SC4Runner's Avatar
Registered User
20 Year Member
Liked
 
Joined: Apr 2005
Posts: 347
Likes: 9
From: Blue Mtns, Eastern Oregon
I need the center overhead dome light and mirror assembly if they are in good shape. Also, if it still has the ash tray and bezel that surrounds the ash tray and radio, I need that as well.

If the grille is the same as an '81, how much for the grille and screws and clips providing the grille is not broken?

If the door cylinder locks the ignition cylinder lock all work and match, how much for them?

Does it have the throttle pedal? I need one of those as well.

Let me know ASAP.

Thanks,

Doug

Last edited by 99SC4Runner; Dec 22, 2012 at 01:40 PM.
Old Dec 22, 2012 | 02:09 PM
  #7  
1stgenrnrdude's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 593
Likes: 0
From: Leesburg, VA
Originally Posted by 99SC4Runner
I need the center overhead dome light and mirror assembly if they are in good shape. Also, if it still has the ash tray and bezel that surrounds the ash tray and radio, I need that as well.

If the grille is the same as an '81, how much for the grille and screws and clips providing the grille is not broken?

If the door cylinder locks the ignition cylinder lock all work and match, how much for them?

Does it have the throttle pedal? I need one of those as well.

Let me know ASAP.

Thanks,

Doug
Just sent you a pm, thanks Doug
Old Dec 23, 2012 | 06:18 AM
  #8  
1980lwb's Avatar
Registered User
 
Joined: Jun 2012
Posts: 157
Likes: 0
From: petersburg wv
Passenger side front fender and dash pad if its in good shape
Old Dec 23, 2012 | 06:31 AM
  #9  
dropzone's Avatar
Fossilized
iTrader: (6)
 
Joined: Oct 2005
Posts: 19,771
Likes: 456
From: PNW
Originally Posted by 99SC4Runner

If the grille is the same as an '81,

Doug
82-83 grill is different from 79-81. The headlight surrounds will not fit with later grill
Old Dec 23, 2012 | 01:35 PM
  #10  
1stgenrnrdude's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 593
Likes: 0
From: Leesburg, VA
Thank you dropzone, pm sent.
Old Dec 30, 2012 | 08:45 AM
  #11  
cman1's Avatar
Registered User
iTrader: (1)
 
Joined: Jul 2010
Posts: 856
Likes: 1
From: greenville,wi
could use all four door hinges.and the 4 rubber hood bumpers on top of the fenders ,also the cowl rubber seal if theyre not wrecked.thanx.
Old Dec 30, 2012 | 02:00 PM
  #12  
stepdads4runner's Avatar
Registered User
 
Joined: Aug 2012
Posts: 14
Likes: 0
From: Tallahassee Fl.
how much for both mirrors???
Old Dec 31, 2012 | 03:47 PM
  #13  
1stgenrnrdude's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 593
Likes: 0
From: Leesburg, VA
Pm's sent
Old Dec 31, 2012 | 03:50 PM
  #14  
1stgenrnrdude's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 593
Likes: 0
From: Leesburg, VA
Originally Posted by cman1
could use all four door hinges.and the 4 rubber hood bumpers on top of the fenders ,also the cowl rubber seal if theyre not wrecked.thanx.
It won't let me send a pm to you I will check out all those for you tomorrow when I go to work, that's where the truck is


Collin
Old Dec 31, 2012 | 04:03 PM
  #15  
cman1's Avatar
Registered User
iTrader: (1)
 
Joined: Jul 2010
Posts: 856
Likes: 1
From: greenville,wi
sounds good.
Old Dec 31, 2012 | 06:08 PM
  #16  
jastamjas's Avatar
Registered User
 
Joined: May 2012
Posts: 47
Likes: 0
How much for the heater mixing valve. I think thats what its called. On the fire wall engine side?
Old Dec 31, 2012 | 06:15 PM
  #17  
1stgenrnrdude's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 593
Likes: 0
From: Leesburg, VA
Originally Posted by jastamjas
How much for the heater mixing valve. I think thats what its called. On the fire wall engine side?
The heater core bypass valve? Ill check to make sure its there and in good shape tomorrow for ya
Old Jan 1, 2013 | 02:17 PM
  #18  
1stgenrnrdude's Avatar
Thread Starter
Registered User
 
Joined: Apr 2006
Posts: 593
Likes: 0
From: Leesburg, VA
Originally Posted by cman1
could use all four door hinges.and the 4 rubber hood bumpers on top of the fenders ,also the cowl rubber seal if theyre not wrecked.thanx.
Hey man, I tried taking out those rubber stoppers and they are going to come apart if i try to remove them, sorry.

I'm also trying to keep the hinges with the doors.
Old Jan 1, 2013 | 02:41 PM
  #19  
cman1's Avatar
Registered User
iTrader: (1)
 
Joined: Jul 2010
Posts: 856
Likes: 1
From: greenville,wi
alrightythen..
Old Jan 2, 2013 | 11:40 AM
  #20  
toastyjosh's Avatar
Registered User
iTrader: (1)
 
Joined: Dec 2010
Posts: 393
Likes: 0
From: new mexico
Do you still have the knobs on the radio?

Thread Tools
Search this Thread

All times are GMT -8. The time now is 07:58 PM.