Notices
The Classifieds GraveYard Where old classifieds threads go that are too good to let go

Parting out 1994 4runner

Thread Tools
 
Search this Thread
 
Old Apr 18, 2008 | 03:34 PM
  #1  
alankenji_84's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 47
Likes: 0
From: AK
Parting out 1994 4runner

So i have this wrecked 4runner that i pulled the engine on. it is a SR5 22RE 4x4 with a manual transmission. i was going to have it towed because i need it gone soon, but though i would check if anybody wanted or need e anything off it first. I live in alaska, so probably only stuff that fits in a flat rate box. The up side is i don't really care about money right now, i just don't want it to go to waste so shoot me a couple bucks and cover the $8.50 or whatever it is for flatrate now and it's yours if i got it still.
Old Apr 18, 2008 | 07:08 PM
  #2  
alankenji_84's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 47
Likes: 0
From: AK
Forgot to add that if there is anything else that is wanted that would need to be shipped via another method other than just a flat rate box, i would do that as well if it wasn't too big a hassle as i am just trying to get rid of some of this stuff before the car gets junked. thanks
Old Apr 18, 2008 | 08:32 PM
  #3  
Peach's Avatar
Registered User
 
Joined: Apr 2008
Posts: 52
Likes: 0
From: Cali
HEy Hey!!!

You have the skid plate for it???

how much and to ship it too 91331 zip thanks
Old Apr 18, 2008 | 09:06 PM
  #4  
UKMyers's Avatar
Contributing Member
 
Joined: May 2002
Posts: 4,267
Likes: 1
From: Solano Co, CA Originally a North Idaho Hick
Is the interior grey? I need a drivers side seat belt assembly if it is.
Old Apr 20, 2008 | 01:56 AM
  #5  
alankenji_84's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 47
Likes: 0
From: AK
the interior is gray and i still have both belts. as for the skid plate... i still have it but it was spray painted green and is kind of dented up. i'll try and figure out how much to ship if you still want it though.
Old Apr 20, 2008 | 05:06 AM
  #6  
4x4CPOSEADOG's Avatar
Registered User
 
Joined: Feb 2003
Posts: 425
Likes: 0
From: On the right coast
How much for two wheel center caps?
Old Apr 20, 2008 | 07:33 AM
  #7  
Peach's Avatar
Registered User
 
Joined: Apr 2008
Posts: 52
Likes: 0
From: Cali
Ahh MAn!!!

Mine is also dented so dont bother thx anywas
Old Apr 20, 2008 | 08:37 AM
  #8  
alankenji_84's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 47
Likes: 0
From: AK
i honestly don't know how much to ask for most of these parts, nor do i really too much about making much money. just tell me how much you would give me for the parts and i'll probably go with that plus the flat rate shipping. Thanks
Old Apr 20, 2008 | 09:24 AM
  #9  
alankenji_84's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 47
Likes: 0
From: AK
oh and i forgot to mention. I still have the old blown 22RE from my other rig. It has about a 4 inch hole in the side, but the head/cam/valvecover and all sensors etc are good, i'm not sure how much shipping would be though for the heads, but a quick glance at UPS looked like about $75 so if anybody needs that kind of stuff either just let me know.
Old Apr 20, 2008 | 10:28 AM
  #10  
4x4CPOSEADOG's Avatar
Registered User
 
Joined: Feb 2003
Posts: 425
Likes: 0
From: On the right coast
You got PM.
Old Apr 20, 2008 | 11:25 AM
  #11  
fastkevman's Avatar
Registered User
 
Joined: Aug 2007
Posts: 703
Likes: 0
From: Pennsylvania
PM sent
Old Apr 27, 2008 | 02:29 PM
  #12  
jrfast's Avatar
Registered User
 
Joined: Dec 2005
Posts: 49
Likes: 0
do you have a chrome rear bumper with any ( I need all) of the brackets?
Old Apr 30, 2008 | 02:06 AM
  #13  
alankenji_84's Avatar
Thread Starter
Registered User
 
Joined: Jan 2007
Posts: 47
Likes: 0
From: AK
bumper

yeah, but i live in alaska, so unless you are here, it'll probably be a lot to ship. i didn't check out your sig though to see where you are
Old Apr 30, 2008 | 06:40 PM
  #14  
jrfast's Avatar
Registered User
 
Joined: Dec 2005
Posts: 49
Likes: 0
Do you have any of the following:
antenna assembly (either power or manual) Only the part below the fender not the mast.

combination switch
Brown sunvisors
let me know thanks Josephhenry@cox.net
Old May 16, 2008 | 08:52 AM
  #15  
lovetharunner's Avatar
Registered User
 
Joined: May 2008
Posts: 164
Likes: 0
From: Eugene, OR
I am looking for a drivers side headlight assembly. One of the tabs broke on mine and my headlight doesn't aim straight. How much to have shipped to 97404. Thanks.
Old May 16, 2008 | 12:24 PM
  #16  
element2050's Avatar
Registered User
 
Joined: Jun 2007
Posts: 47
Likes: 0
Ill take the front bumper brackets! How much for shipping 84096?

Last edited by element2050; May 16, 2008 at 12:25 PM.
Old May 18, 2008 | 01:45 AM
  #17  
Robert m's Avatar
Registered User
15 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
 
Joined: May 2006
Posts: 1,974
Likes: 143
From: Apple Valley, CA
if you still have this, how much you want for the rear view mirror and map light assembly?
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Goddamnboh
3.4 Swaps
12
May 11, 2016 09:22 PM
crazypaint
Buying & Selling Advice - Feeler/Gauging Interest
3
Jun 23, 2015 03:27 AM
94hiluxZE
86-95 Trucks & 4Runners
0
Jun 22, 2015 10:42 AM
bobbybouche
86-95 Trucks & 4Runners
0
Jun 18, 2015 10:22 AM




All times are GMT -8. The time now is 10:08 PM.