I have a metalic forrest green tailgate off of my 93 4Runner, has some dents not rusted though. More importantly I have all the internals, and glass all in great shape, everything from motor to wiring to ingnition switch and key. Willing to part out or sell as whole

 

do you know if it will fit a 90 with a spare tire? and how much? any pics?

 

should fit 90 all the years has the spare tire. $200 I will get pics up next weekend... sorry for the delay

 

how much for just the window and the regulatorw/motor? my actaul tail gate is in good condition. I think the glass is too, but the spot where it mounts to the regulator is all rusted and the heating element doesn't work. Let me know, and shipping for 60035.

 

next in line for the window motor.

 

The rear gate is differant for the 90 with a rear mounted spare tire. The tag and back-up lights are relocated.

 

/\ yeah, thats what i though.

i took my tailgate apart today and all I really need is the window w/ a decent track, mine is all rusted, i riged to work for now, but thats all i need.

Let me know how much with shipping to 60035,

Thanx,
ALEX

 

or is those tracks, part of the regulator?

 

Glass $50, motor and regulator motor and regulator $90

otherwise make me an offer though would much rather sell as whole, will get pics up this weekend

 

No sorry misread about the spare tire.. sorry

 

do you know if the tracks are connected to the glass or the regulator? If its to the regulator, i'll take the whole tailgate. if its to the glass, i just want that.

 

the glass is detached rightnow from everything it is just a fews bolts, I believe the tracks and regulator are together.

 

I have a 94 and the tracks(channels) "attach" to the glass and will slide right off the regulator. I just purchased from Toyota the tracks(channels) and fillers(rubber inserts) $60/for all 4 pieces (ouch) but my homemade repair didn't last long. My internals all seem to working OK except the keyswitch doesn't operate the window. (I've ohm'd the switch fine so it must be in the wiring). I may be interested in the shell if the internals go separate - if I wind up getting the gate I may pickup local.

What I really need is for someone to explain how in the heck you get the tracks and the rubber inserts installed onto the glass - these do not bolt to the glass - they would be more like 'pressed' on. I thought of using soapy water but I think that may leave it 'slippery' and cause the window to bump out later. My next idea is to take the glass and tracks to Toyota before I get pissed and start pounding on it with a rubber mallet and break the glass.

 

i'll take all the internals then, /\ can have the shell. let me know how to send you the money (paypal works for me) and how much for shipping to 60035

 

it is definately possible to reinstall everything because when i bought the new tailgate i kept my old glass and key switch. when i return home this weekend i will take a look and let you know what I did to separate and reunite all the pieces..

 

Here is a link to the webshots folder with the pics in it.

 

hey, if possible then can i get just the window with the tracks attached to it. Thanx, let me know how much it will be with shipping to 60035. Thank you for your time.

ALEX

 

Pm's sent

 

pm replyed.

 

pm sent!