85 4 runner
May 12, 2011 | 02:22 PM
#1
Thread Starter
Registered User
Joined: Dec 2009
Posts: 42
Likes: 0
From: westlake ohio
85 4 runner
good frame rough body panles
$500 front and rear axles rear has new spool (85 full bottom truss)
w56 trans $250
top shift transfercase $150
22re motor no idea of shape $100
new clutch was installed with fly wheel $75
$100 for removable top needs pass side rear most glass
interior parts are rough make offer on what you need
door glass in good shape $25 a side
if you need some thing just ask have whole truck still all parts loceted neer cleveland ohio
$500 front and rear axles rear has new spool (85 full bottom truss)
w56 trans $250
top shift transfercase $150
22re motor no idea of shape $100
new clutch was installed with fly wheel $75
$100 for removable top needs pass side rear most glass
interior parts are rough make offer on what you need
door glass in good shape $25 a side
if you need some thing just ask have whole truck still all parts loceted neer cleveland ohio
May 12, 2011 | 03:59 PM
#3
Thread Starter
Registered User
Joined: Dec 2009
Posts: 42
Likes: 0
From: westlake ohio
no inclinometer wasnt in the truck
May 14, 2011 | 06:48 AM
#4
Thread Starter
Registered User
Joined: Dec 2009
Posts: 42
Likes: 0
From: westlake ohio
trans and tcase gone.
May 15, 2011 | 06:41 AM
#5
Registered User
Joined: May 2011
Posts: 26
Likes: 0
From: Belchertown, MA
Hey, would you happen to have the throttle cable? I'm in 01007. Thanks.
May 15, 2011 | 12:10 PM
#6
Thread Starter
Registered User
Joined: Dec 2009
Posts: 42
Likes: 0
From: westlake ohio
yes i do call it 30 shipped.
truck has tilt coulomb in it aswell if anyone is interested.
truck has tilt coulomb in it aswell if anyone is interested.
Last edited by 88redyota; May 15, 2011 at 02:08 PM.
May 15, 2011 | 07:15 PM
#7
Registered User
Joined: Mar 2011
Posts: 250
Likes: 1
From: San Diego, CA
PM'd 
oh, didnt put it in my PM... but you have a fuel door off that 85 4runner?
oh, didnt put it in my PM... but you have a fuel door off that 85 4runner?
Last edited by 4x4climber; May 15, 2011 at 07:16 PM.
Trending Topics
May 16, 2011 | 05:55 AM
#8
Thread Starter
Registered User
Joined: Dec 2009
Posts: 42
Likes: 0
From: westlake ohio
truck and all remaining unsold parts will be going to scrap yard june 1 2011 so if i dont have money in hand or in my paypal by then parts will be gone. anything you may want i probably have. trans and tcase steering box are gone.
May 16, 2011 | 07:17 AM
#9
Registered User
Joined: Jan 2009
Posts: 235
Likes: 0
From: NC
rear drive shaft flange
I need all that is circled. Rear flange yoke and sleeve yoke...price shipped to 27882?
May 16, 2011 | 01:59 PM
#10
Thread Starter
Registered User
Joined: Dec 2009
Posts: 42
Likes: 0
From: westlake ohio
you know you circled stuff on a front shaft? witch one do you need fromt and rear.
May 16, 2011 | 10:09 PM
#12
Registered User
Joined: Apr 2011
Posts: 16
Likes: 0
Do you have the dome light cover and the little rubber stopper/grommet for the brake light switch? How much for the clutch pedal and master cylinder?
May 17, 2011 | 03:54 AM
#14
Thread Starter
Registered User
Joined: Dec 2009
Posts: 42
Likes: 0
From: westlake ohio
and pms sent with prices. master cylinders are both already gone for future notice.
Last edited by 88redyota; May 17, 2011 at 04:23 AM.
May 17, 2011 | 05:02 PM
#18
Thread Starter
Registered User
Joined: Dec 2009
Posts: 42
Likes: 0
From: westlake ohio
brown interior with man windows
May 17, 2011 | 05:54 PM
#19
Registered User
Joined: Jul 2006
Posts: 25
Likes: 0
From: Raleigh, NC
How about the brake/clutch pedal with the hanger/firewall mounting bracket including any nuts, bolts, linkages that go with it.
Also the console /boots that go around and cover the 4wd and gear shifters?
Also the console /boots that go around and cover the 4wd and gear shifters?
May 17, 2011 | 06:08 PM
#20
Thread Starter
Registered User
Joined: Dec 2009
Posts: 42
Likes: 0
From: westlake ohio
center console around shifters are gone aswell as shifter boots.
pm sent
pm sent
