Looking to swap a diesel into a first gen 4runner
#1
Looking to swap a diesel into a first gen 4runner
Hi so my last runner met an untimely end when the head blew and i couldn't afford to fix it so it was parted out and now i am left with a 1987 4 runner body and frame. Both of which i am completely restoring, i have fiberglass panels for the front and rear quarters, as well as the tailgate.
I plan on running 37" tires, with either a 4 link or wishbone suspension in the rear and a 2 link with a panhard bar for the front.
Now i am stuck as what to do for the engine and drive train. I would like to put in a diesel i have swapped an engine before with my brother for his volkswagen so i have some experience. A turbo diesel would be nice. For the drive train i am thinking dana 44s. and maybe a 5.10 gear ratio.
If anyone knows what diesel would fit nicely and what i should be looking for transmission wise and also any other axle suggestions would be nice.
Thanks
I plan on running 37" tires, with either a 4 link or wishbone suspension in the rear and a 2 link with a panhard bar for the front.
Now i am stuck as what to do for the engine and drive train. I would like to put in a diesel i have swapped an engine before with my brother for his volkswagen so i have some experience. A turbo diesel would be nice. For the drive train i am thinking dana 44s. and maybe a 5.10 gear ratio.
If anyone knows what diesel would fit nicely and what i should be looking for transmission wise and also any other axle suggestions would be nice.
Thanks
#2
i saw this video yesterday on youtube here is the link http://www.youtube.com/watch?v=JTeo_p_maNw
#4
#5
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM






