Why can't I find this connector in any manuals that I bought or download?

I have a '92 with a 2000 5VZE going into it. This is the male side of the one that has a lever clip. Oh yeah, I need the pinouts.

 

Anyone? This should be simpler than the other connectors.

 

Isn't that the II1 or II2 or something? I didn't use most of the wires for this. But the ones used I believe went to the IH1 and 2 plugs for your 92? And I would visit the techinfo site...

 

I'm not sure. In my EWD for the 92 Pickup, the I11 (eleven) and I12 (twelve) are shown under the splice points section and they are both wires only. They are not actual connectors, because the connectors page do not show those. II1 ("eye" "eye" "one") and II2 ("eye" "eye" "two") don't exist in my EWD's.

I don't really want to pay for the techinfo site unless I absolutely have to. I already spent enough money on the Toyota EWD's, thinking since Toyota made those, they should have it.

 

Just to clarify for me, that is the plug that came off the 3.4 correct?

What I would do is use Acrobat to search wire COLORS and find that plug on the EWD. Thats what I always did.

 

That end is actually the male end from the '92 body. The female end is from the '00 engine.