Auto 3.4 swap to manual 3.4 tacoma
04-04-2018, 06:58 PM
#1
Auto 3.4 swap to manual 3.4 tacoma
Hello everyone! You might have seen a post a while about my issues so I’ll save that story. I’m trying to swap a 3.4 from an auto Tacoma into my 97 3.4 manual. What are that major kinks with the different transmissions? I’ve tried some googling but everything just seems to be about transmissions swaps. Thanks in advance!
04-09-2018, 08:22 PM
#3
wiring harness. What year is the donor engine from? depending on year, some sensors and injectors were different. As well as the port layout the upper intake plenum. If you're stripping it down to just the long block, block with heads, just reuse your manifolds and sensors.
Thread
Thread Starter
Forum
Replies
Last Post
outahere
95.5-2004 Tacomas & 96-2002 4Runners
10
09-15-2004 01:29 PM
PBsurf
95.5-2004 Tacomas & 96-2002 4Runners
0
10-03-2003 09:20 PM
