Hey guys, I'm doing the 3.4l swap into a 93 pickup manual with the 3.0. I already most of the mechanical stuff taken care of as far as installation goes. The exhaust was the biggest pain but its close to being finished. My question is with the mating of the 5vz harness to the body harness of the pickup. I have both the vehicles so I cut the body side c1 and c2 connectors out of the 98 4runner and the engine harness side of pickup. I plan on splicing the two together so I can just plug it up. My problem is that I can't get the EWD for the pickup. I signed up for TIS and got the info for the 4runner but the pickup did not return any results. Anyone have a EWD for the pickup handy for can help me search for it? I have access until tomorrow at midnight. Thanks in advance.

 

Runner diagrams worked better than pickup ones on my 92. Try that

 

I downloaded the 93 4runner EWD, no luck. Don't don't match up with diagram. I don't have all the wires labeled for the 4runner male side though. I guess thats progress.

 

The swap I did on my 93 pickup I used the 4runner's EWD. Everything matched up

 

I saw what I did wrong, I was looking at IH2 instead of IH1 when trying to find my wires. Thanks for pointing me in the right direction Jason