4th gen will do Truckhaven without even a sweat....trust me

 

Will a lightly modified 1st gen make it?

 

Smartass.

 

I'm in the same boat. effectively I only have sliders, 33's and about 2.5" of lift (if that).

 

The ATRAC on the 4th Gens made all the difference in a number of spots. So Jared will be fine for the most, still need to pay attention when driving .

We had an older pickup with us with only a LSD in the back. On a number of climbs the pickup had issues due to traction, he managed to get it through with careful driving and some "road building" in spots. So deathrunner I hope you have lockers or LSDs or else you will have a bit of a challenge on your hands if you run some of the climbs we did a couple weeks back. You guys will most probably run different climbs than we did, so who knows. Truckhaven is not exactly a single trail type area.

Have fun!!

 

Rad, I'm locked. I think my only real downfalls at this point are the lack of power (22re...yes I have 4.88's) and the width of my rig (probably as wide as a 4th gen)

 

Seth, you will only make it if you are not afraid of scratching that pretty truck.

 

Is it really that tight? I woudln't be afraid of wrangler canyon. But if it gets much tighter it probably ain't for me quite yet. I got some hard ass Dupont stage 3 paint so it is pretty tough.

 

or

you can

exo and go

you wusses

 

and yes marc finally taught me how to post pics....!!!!! thanks marc!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!!!!!!!!!!!!!!!!!

 

No problem bro....I bet you wish the mini-exo was on before you went up and down the waterfall at Superstions!!

 

Hey Seth, it looks like you got rid of the white fenders, looks really good.

Damn Mikey! As long as you go first it should clearance anything

 

it looks great on the drivers side but on the passenger side is gonna look silly where all the body damage is. oh well this whole thing just started as a set of new rocksliders and it's just gone nuts...... there will be more too...

 

Damn!!!!

I like it mikey. Are yo planning a swingout for the tire?

I like your ideas.

 

Thanks dude, The white fenders are gone, but now I have a nice paint job that I'm gonna feel guilty scratchin. Oh Well :pat:

 

the rear uprights are going to have a swing out for the tire, hi-lift and axe. along with a tab for my light and c.b. antenna. i'll keep posting pics as work gets done. my buddy is doing all this in his spare time he wants my truck to be his business card, because he wants to start doing fab work as his side job and opposed to construction... all i'm paying for is materials......

 

That's awesome. Now Alex will have a ladder to use when climbing in with the top off!!!

No offense, but why do you need an axe? Especially in California. Or by axe did you mean:

 

my buddy bought me one of those max axe tools for my bday.... the axe that turns into a shovel rake and all the other stuff..... so i figure what the heck i'll mount it... is that your guitar that thing is sick

 

Nah, just one I found on google real quick.

Here are a couple that I've sold recently:

http://photobucket.com/albums/v373/D.../Blue%20Swirl/

http://photobucket.com/albums/v373/D...Green%20Swirl/

I painted my spare fuel cans like them too, I'm a nerd.

 

how do you paint something like that.. im in the process of making the inner door panels for my half doors