OK, Wayne (KD7NAC_07FJ) talked me into doing it the good way.
Here is what I have so far.
Two 12v outlets
http://www.radioshack.com/product/in...tId=2062272&cp



The box below should be here by the weekend I hope.
http://www.northeastmarineelectronic...OD&ProdID=2750



The aux box will be under the hood and the CB power and the IPF foglight power wires will be taken off of the battery and ran to the box.
The box will be wired to the battery with 10 gauge like I did my old aux box as seen in the tech section on my old rig.

From the aux box will be wiring from it to the two 12v outlets.
The outlets will be where Wayne put his, very professional looking.
Those are the plugs in Wayne's FJ.



This is going to rock!
Then I just have to mount the Engel Slide Loc that holds the fridge in place from sliding around, and I am good to go.

Ice cream on a hot day on a run.
Yuuuuuuumy

 

Any update?

I was just reading the norcold owners manual, take a look at page #9, not sure if ARB covers that or not??

 

Oh yeah, big time.
Check in the FJ Cruiser section under my mods thread on page 5.
https://www.yotatech.com/forums/show...t=90962&page=5

Box is in the cab too, and with 6 gauge wire.

 

SWEET, I want one