even though this thread is over a year old...

rear bumper and winch is next
then new skids

 

I got almost everything done from last year except for the cage. Here is what I plan on getting next.

Optima Battery
New front Bumper
3 Hella Rallye 4000's (1 Pencil, 2 Euro)

 

in the next 6 months:
sliders
more skid plates
custom center console
camping platform in the rear
more lights
plus fix everything thats wrong with the truck (little stuff thats going to nickel and dime me to death...)

6-12 months:
probably a lockrite in the rear, though i rather have an elocker or arb...
larger alt.
front and rear bumpers

eventually:
SAS
extra 2 inch of lift in the rear via ome landcruiser lift coils
1 or 2 inch lift
im sure theres lots im forgetting

 

Here's my daily driver... "The Donkey" - (don't ask)
http://i93.photobucket.com/albums/l7...Picture006.jpg
Currently on 33x12.5's no lift.... Very few other mods....

Here's what I got to work with.... Little Mule - (figure I'd go with the ass theme)
http://i93.photobucket.com/albums/l7...y/parts007.jpg

On my 33's, and here are my plans

1. Fix rear heat (hard line leaking) - rerouted to front only - DONE
2. Switch tailgate and fenders from Donkey - waiting for paint to dry as we speak
3. Install 4" bracket Lift - buy shocks
3.25. Install 2"body lift on Little Mule - have - just need warmer days (only had truck for 1.5 weeks
3.50. Install 2"body Lift on The Donkey (going to install it on the mule)
4. Spool Donkey Rear (That way until the Little Mule is done I can wheel better - both 4.10'd for now)
So when the Little Mule is done I can just switch the 3rd member...
4.25. Save for 35's for Little Mule
5. Body Work - quarters and rockers
6. Paint it green - like donkey only darker
7. Regear to 5.29:1 - Lock front
8. Winch
Keep in mind this a trail only rig - unless it turns out really well - other than that "The Donkey" is the daily...

That's it for now - but you know something may change.... Please feel free to comment id you have any other ideas.concerns....

 

Bumpers and sliders next. I'm not sure which company though.

 

the four i have on my list is a 4runner cage from 4x4innovations, a set of sky lock diy beadlocks and mount a rear tire holder and a 4.3 swap

 

Tofer, it looks like you did pretty good with your list. lol

 

My next mod is getting the main Yaesu 857D radio unit mounted and wired up perhaps tomorrow.
Got the faceplate and antenna done over the past few weeks.



And that is the last mod for awhile, unless I get the body mount chop taken care of over Christmas vacation.

Then come spring time I might go for a rear bumper.
I have it narrowed down to one vendor now.

 

nope bad..... forgot the pay off the credit cards part

 

I'l play...


Planning on:

Custom tube bumper up front
Interior ambient lighting
New rear speakers and 10" sub/amp
Clear corners and signals
Jeff mosk 3 guage a-pillar pod with electric Oil psi, water temp and Volt meter

 

Next few months:

-Upgraded light harness & headlights
-New steering stabilizer
-Homebrew sliders

Next 1 year or two:

-BJ spacers & new springs
-4.56 e-lockers front & rear
-31s

ETA- oh yeah, you can just read my sig line

 

my turn:

rear locker(aussie or ARB, depending on $)
tube doors w/ quick release hinges
Marlin Crawler rear bumper
Trail Gear front bumper with the big dumb stinger that i love
BudBuilt skid/belly plate.
sliders
Warn winch
33" M/T's
minimal lift (most likely leave it stock height)

 

Dug out in the various corners of the garage: in this pile of junk is 2 TC's, dual adapter, 4.7 gears, twin stick, dual TC crossmember, rear springs, shocks, front shock hoops, V6 Calipers, LC Rotors, front axle armor, front end rebuild kit and rest of rear lift mounts (no blocks)...been accumulating this pile for a year or so...

hope to pick the truck up after a week or so

 

hahahahah i have exact 2 recycling bins full of yoter parts at my dads house in hillsboro.....

 

For my DD 86 regular cab 22r

By this Summer
H4 Lighting upgrade
Marlin front & rear bumpers
Paint
spray in bed liner

For my crawler project have the truck but need the $$$ and time so this might be a year or more down the road. 1990 extra cab 22re

SAS
Lockers front & rear
marlin bumpers and sliders
rear disc breaks
35"
5.29's
exo cage
bobbed bed
second t-case

I think that will be a good start

 

Next couple weeks:
mount sliders
Order MC rear bumper
Pick up a spare block to build this winter
Detroit for the rear
motor mounts
stereo
door locks and new ignition


Spring:
TG Lift, w/ high steer
33's
4.88 gears
front bumper
4.70 gears for tcase
hopefully soon following; Dual T cases
drive shafts

The more sit here...
interior cage
seats w/ 4 point
lights
winch
interior panels for rear

I have been bitten by the mod bug

 

Go from the dreaming of buying a truck phase, to the buying a truck phase lol!

 

Did ya ever get those stickers on ?

Anyways, Bumper is on, sliders are here, and the Arb locker is going in tomorrow.. I'm a little late on reaching my goals but still working on em.
Looks like a few of you are way past your goals now.

 

forgot to foresee the 3.4 swap...

 

#1 duals with 4.7's

# 2 finish exo armor

# 3 38's or 39's

#4 propane

then I'll consider it built