Whats the next mod for you truck?
#41
Midi,
So the Airaid works for 96-97? This is the crap I have on order so far:
TRD Supercharger
2.2 pulley
URD fuel setup
JBA exhaust (got I deal I think, stainless for $180?)
ordering:
filter (to do airbox mod)
Airaid (if it fits)
Not doing headers/high flow cat yet, need a new head unit first. Does the URD setup come with baseline setting? I don't have anything to "tune" with but I do work in SF Bay Area.
So the Airaid works for 96-97? This is the crap I have on order so far:
TRD Supercharger
2.2 pulley
URD fuel setup
JBA exhaust (got I deal I think, stainless for $180?)
ordering:
filter (to do airbox mod)
Airaid (if it fits)
Not doing headers/high flow cat yet, need a new head unit first. Does the URD setup come with baseline setting? I don't have anything to "tune" with but I do work in SF Bay Area.
#42
Registered User
Originally Posted by stiffler
Midi,
So the Airaid works for 96-97?
So the Airaid works for 96-97?
Low and behold... pop! it went right in there.
I wrote Airaid and sent 'em a pic; they were thrilled and sent me a hat. I guess they never updated the specs though.
Does the URD setup come with baseline setting? I don't have anything to "tune" with but I do work in SF Bay Area.
Have fun!
#43
Contributing Member
I purchased a 3.4 to replace my 95 3.0 this should keep me busy for a few hours (sarcasim) .
during that install I will be adding a 2 inch body lift, 3 inch suspension (brand ?), Headers and exhaust. Getting these mods installed in the next two months are my goals. I'm really gonna need some help from this forum on this conversion. Here is a pic of my new motor that I am rebuilding :bounce2:. Also I am documenting everything in this conversion with lots of pics and reciepts that I will start my own topic later with.
Thanks for the thread topic
, Thomas
during that install I will be adding a 2 inch body lift, 3 inch suspension (brand ?), Headers and exhaust. Getting these mods installed in the next two months are my goals. I'm really gonna need some help from this forum on this conversion. Here is a pic of my new motor that I am rebuilding :bounce2:. Also I am documenting everything in this conversion with lots of pics and reciepts that I will start my own topic later with.
Thanks for the thread topic
, Thomas
#45
Contributing Member
Originally Posted by Tragic Drive
I purchased a 3.4 to replace my 95 3.0 this should keep me busy for a few hours (sarcasim) .
during that install I will be adding a 2 inch body lift, 3 inch suspension (brand ?), Headers and exhaust. Getting these mods installed in the next two months are my goals. I'm really gonna need some help from this forum on this conversion. Here is a pic of my new motor that I am rebuilding :bounce2:. Also I am documenting everything in this conversion with lots of pics and reciepts that I will start my own topic later with.
Thanks for the thread topic
, Thomas
during that install I will be adding a 2 inch body lift, 3 inch suspension (brand ?), Headers and exhaust. Getting these mods installed in the next two months are my goals. I'm really gonna need some help from this forum on this conversion. Here is a pic of my new motor that I am rebuilding :bounce2:. Also I am documenting everything in this conversion with lots of pics and reciepts that I will start my own topic later with.
Thanks for the thread topic
, Thomas
Nice TL1000!! MMM... I just sold my gixxer, I miss riding so much... :cry:
#47
Contributing Member
The motor swap is complete and now I'm working on the suspension..
Its looking like cruiser coils and SDORI spacers will be installed this weekend. After that it's all about the lockers and supercharger in the spring.
Its looking like cruiser coils and SDORI spacers will be installed this weekend. After that it's all about the lockers and supercharger in the spring.
#48
Registered User
Join Date: Jan 2004
Location: San Diego, CA
Posts: 156
Likes: 0
Received 0 Likes
on
0 Posts
-4Runner
-A pair of black ProComp 100w offroad lights
-Tacoma whip - maybe??
-Land Cruiser
-A pair of black ProComp 100w offroad lights - just needs to be installed
-Center Diff. Lock switch
-A set of new Nitto Terra Grappler AT's
-A pair of black ProComp 100w offroad lights
-Tacoma whip - maybe??
-Land Cruiser
-A pair of black ProComp 100w offroad lights - just needs to be installed
-Center Diff. Lock switch
-A set of new Nitto Terra Grappler AT's
#49
Contributing Member
This is just my DD/mill car, so not too many mods
Soon:
Tires (these are getting sketchy in the snow) - either 32x11.50 or 33x10.50
Upgrade engine grounds
Get new feet and install my Yakima rack
4crawler light harness
Fix radio antenna (Taco whip?)
Next:
Ball joint spacers and spring spacers to clear the big tires better
This summer:
Aux fuse block for all the light relays and fuses
Sliders
Bumpers and tire carrier
Locker
Dreamin':
node's turbo kit
Soon:
Tires (these are getting sketchy in the snow) - either 32x11.50 or 33x10.50
Upgrade engine grounds
Get new feet and install my Yakima rack
4crawler light harness
Fix radio antenna (Taco whip?)
Next:
Ball joint spacers and spring spacers to clear the big tires better
This summer:
Aux fuse block for all the light relays and fuses
Sliders
Bumpers and tire carrier
Locker
Dreamin':
node's turbo kit
#50
Originally Posted by Tragic Drive
The motor swap is complete and now I'm working on the suspension..
Its looking like cruiser coils and SDORI spacers will be installed this weekend. After that it's all about the lockers and supercharger in the spring.
Its looking like cruiser coils and SDORI spacers will be installed this weekend. After that it's all about the lockers and supercharger in the spring.
Keep us posted on the lift install. That's a sweet lookin rig.
#51
Contributing Member
Join Date: Sep 2004
Location: Denver, CO
Posts: 489
Likes: 0
Received 0 Likes
on
0 Posts
This month-
Lift
Tires
Wheels
Next 6 Months-
ARB front bumper
Sliders
Skid plate (if I can find one)
Next year
Custom bumper (mabye only the design)
Winch to go with the front bumper
Lights for front bumper
Custom box
Next 20 years
All i can desire
Lift
Tires
Wheels
Next 6 Months-
ARB front bumper
Sliders
Skid plate (if I can find one)
Next year
Custom bumper (mabye only the design)
Winch to go with the front bumper
Lights for front bumper
Custom box
Next 20 years
All i can desire
#52
Registered User
getting a lockright for the rear, black wheels from wheelersoffroad.com, and....uh......thats good for now I guess....just got my marlin sliders on about a month or so ago, so Im doin good....after this....all dough goes to my sas. Im not going to waste any money on ifs parts (bj spacers, tbars, front locker, etc) cuz itll all be gone by the end of this coming summer, and in its place.... a solid mo-foin' axle baby!!! later guys...Alex
#53
Contributing Member
Originally Posted by jethro
Lookin' good man. How's the new motor treating you?
Keep us posted on the lift install. That's a sweet lookin rig.
Keep us posted on the lift install. That's a sweet lookin rig.
The lift is going all right, the LC coils were not to much fun installing. I have to wait till next weekend to install my BS spacers.
Here is a pic LC rear coils measure 16" top of rim to fender lip.
Front suspension no lift measure about 15" top of rim to fender lip.
#55
Registered User
The next mods are:
BJ spacers
33" tires
BL
Drivetrain lift
Aussie Locker
LSD in front
Custom bumpers
Custom light bars
Junkyard speed density or junkyard Mass air for the 3.0 (If I get fed up them maybe a 302!)
Camo paint job
So far nothing has been done! But I have the Rancho lift kit sitting in the box. Go figure
James
BJ spacers
33" tires
BL
Drivetrain lift
Aussie Locker
LSD in front
Custom bumpers
Custom light bars
Junkyard speed density or junkyard Mass air for the 3.0 (If I get fed up them maybe a 302!)
Camo paint job
So far nothing has been done! But I have the Rancho lift kit sitting in the box. Go figure
James
#60
Contributing Member
tomorrow the ipod's getting hooked up to the head unit. other than that, i think the next off road worthy wise mod will be getting the bed bobbed.