transfer case gears
cage
solid axle swap
dual cases

 

I like the "baby seat mod" idea. That's a good one but for now my daughter rides shot gun.
************************************
This month I'm guna do the ISR mod. My intake tube is ripped pretty bad.

Next 6 months:
1.) Inclinometer
2.) B.J. spacers & drop shackles

 

This is going in this Friday.

 

ah yes the up and comming mod list for my runner

1: finish intake/battery swap
2: make brakets to hold my spare in my rear cargo area
3: pull and send injectors to witchhunter to get serviced
4: build a low profile exhaust system
5: hi-pinion front with ARB and 5.29s
6: TG dirty 30s alxes and birfs
7: put 4.7s in my spare tcase and DUAL it up
8: build a front bumper
9: HIDS
10: cage
.
.
11: wheel the living hell out of it and fix whatever is broken lol

 

Looks like I'll be needing a clutch pretty soon..

After that,

Steering stabilizer
ISR
Electric Fan
Manual Hubs, CVs Rotors Bearings
Lift Body to fix sag

Eventually;

Completely rebuild the 3.0 in my shed, add headers and drop it in.
upgrade from 4.56 to 4.88 with locker
Lift suspension, drop front diff,
front locker

 

header and new dual pipes and magnaflow

 

Waiting for some sway discos and my winch bumper (already have the winch).

Then:

Full bud builts
Stubbs sliders
5.29s and air lockers/on-board air. Front and rear.

 

Hopefully by the end of this month
gettin rid of the chain drive t-case.
install 4.7s in gear t-case. w/twin sticks
install new used tranny 90k miles. my truck has over 200,000
marlin clutch 1,200lb

Tryin to get his done before the snow falls
start workin on fabbin up an exo
move steering box forward and move axle forward another inch or two.
hydro assist
39.5 iroks

 

Get my Bushwacker flares on. ViseGrips were just for picture.



And my new wheels and tires.

 

Next upgrade is a MR2 100 amp alternator and upgrade the wire from the alternator to the battery.

 

Next Upgrade: Get an ext cab tacoma with elocker 3.4 and 5spd (seen one in the junkyard today that was totaled...but the motor STILL started..and ran like a dream it only had 72,000 miles on it)..after that..

lift it..throw some nice meats on it (along with some Dick Cepek TORQUE's to the tune of 18x10's)..uhmmm..lock the front eventually..stereo..and then..when the funds are plentiful..SUPERCHARGE it..urd 7th..allll that..along with a nice set of headers.and a 2.5" dual exhaust..im thinking louder than HELL..like CB Extreme..

 

This month

33 or 35 swamper tsl radials
Warn hubs
Get a longspline front driveline
New bench seat

Next month

New exhaust system
Weber carb
3" body lift
Get my radio working

Month after that

Marlin tube bumpers
Install my winch
Body work and paint

Month after that

Line ex bottom of truck 2 tone
New carpet
Dual t cases
Line x bed

Month after that

New side view mirrors
Grill
Snorkel
R&P
Autometer gauges

 

Hopefully this month I'll....

1. Finish the plate work/tube work on my front winch bumper...
2. F150 rear leaf swap/install spool...
3. 2" body lift...
4. New upper shock mount bar w/adjustable shock locations...
5. New shocks front and rear to match lift / front end alignment...
6. Install new manual adjust portioning valve with adjuster in cab...
7. Install my other set of offroad lights...
8. Install dual battery system with master lockout...
9. OBA with dual 5 gallon tank (not much air but I already have the tanks from an old air compressor)
10. I'm sure more, but not sure yet (We'll see how much time scool allows!!!

 

my next mod is to purchase a motor that doesnt use 3 qrts of oil per tank of gas

 

Off road front bumper! I might try to fab one myself.

 

4.88's and new 33/10.5's at's

 

LC coils and Pan hard drop bracket on the 4runner.
Gotta get rid of the saggy butt.

 

whenever i get home, from college, where i will have a garage.....

custom center console
CB install
new rear speakers
spray bedliner onbottom- two tone style
trim front fenders a little
33s or 35s i dont know yet
clean and paint my brake capilers and drums
clean and paint my rims
crossover pipe elimination
rebuild locking hubs
finish welding exaust
paint skid plate
i wanna make custom toe adjustment arms too.
install my rock sliders

thats just with in reason but eventually

SAS
new motor- (possibly a nissan KA24 motor out of my bros 240sx. ill let ya'll know about that later)
dual t-case

and it goes on and on

 

A cap for my subs, new 0 gauge battery terminals and 0 gauge battery wires.

 

This month:
Aisin Hubs
AOR Rear Bumper

6 months:
LC Coil/BJ Spacer Lift
Debating on shocks

Year:
Not sure