General Vehicle Related Topics (Non Year Related) If topic doesn't apply to Toyotas whatsoever, it should be in Off Topic
Sponsored by:
Sponsored by:

What do you not like?

Thread Tools
 
Search this Thread
 
Old May 5, 2021 | 03:37 PM
  #1  
tyvanwie's Avatar
Thread Starter
Registered User
 
Joined: Jul 2018
Posts: 136
Likes: 9
From: Boone, NC
What do you not like?

Thought this might be an interesting topic. What are some things you don't like about your truck/runner? I personally don't like the door panels and dash.
Reply
Old May 5, 2021 | 08:27 PM
  #2  
moto809's Avatar
Registered User
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Jun 2020
Posts: 452
Likes: 120
From: CO
Interesting topic. I like it.
The only thing I really don't like about my 93 pickup is the placement of the cup holders directly in front of the center heater vents.
Reply
Old May 6, 2021 | 05:58 AM
  #3  
tyvanwie's Avatar
Thread Starter
Registered User
 
Joined: Jul 2018
Posts: 136
Likes: 9
From: Boone, NC
Originally Posted by moto809
Interesting topic. I like it.
The only thing I really don't like about my 93 pickup is the placement of the cup holders directly in front of the center heater vents.
does it just end up heating up your drink? Lol
Reply
Old May 6, 2021 | 08:00 AM
  #4  
arlindsay1992's Avatar
Registered User
iTrader: (8)
 
Joined: May 2011
Posts: 1,517
Likes: 354
From: Southeast Virginia
Oh boo hoo, cry me a river. At least you have cup holders.
Reply
Old May 6, 2021 | 12:15 PM
  #5  
Bingle's Avatar
Registered User
10 Year Member
 
Joined: Dec 2011
Posts: 608
Likes: 28
From: Spokane, Wa
Cupholder?
The one on the steering wheel or the one running the stick?

I wish my 81 cab was just a bit bigger so my seat back didn't have to be dead vertical.

Also, dislike that I've had it so long (since 94) that I'd never allow myself to sell it for something I fit in better.

Last edited by Bingle; May 6, 2021 at 12:23 PM.
Reply
Old May 6, 2021 | 01:09 PM
  #6  
habanero's Avatar
Contributing Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Sep 2005
Posts: 8,247
Likes: 497
From: mo
Lower ball joint design on my 96 4Runner.
Mine has 6 stock-ish cup holders, and I like all of them.
Reply
Old May 7, 2021 | 04:35 AM
  #7  
moto809's Avatar
Registered User
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Jun 2020
Posts: 452
Likes: 120
From: CO
Originally Posted by tyvanwie
does it just end up heating up your drink? Lol
Indeed it does, and quite rapidly too.
Reply
Old May 7, 2021 | 04:38 AM
  #8  
moto809's Avatar
Registered User
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Jun 2020
Posts: 452
Likes: 120
From: CO
Originally Posted by arlindsay1992
Oh boo hoo, cry me a river. At least you have cup holders.
Hahahaha well like I said, it's literally the ONLY thing I don't like about my pickup. Sounds like I'm spoiled by your standards.
Reply
Old May 9, 2021 | 01:30 AM
  #9  
SomedayJ's Avatar
Registered User
 
Joined: Jan 2017
Posts: 1,271
Likes: 335
The tailgate electric window in the first gen 4Runners.
Reply
Old May 9, 2021 | 01:49 AM
  #10  
SomedayJ's Avatar
Registered User
 
Joined: Jan 2017
Posts: 1,271
Likes: 335
Originally Posted by moto809
Sounds like I'm spoiled by your standards.


Talking about spoiled, I don't like the Toyota letters painted white in the tailgate, it looks cheap, it should be silver like the other emblems:




Reply
Old May 18, 2021 | 11:16 AM
  #11  
2ToyGuy's Avatar
Registered User
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2005
Posts: 2,345
Likes: 656
From: Chiloquin, OR
I feel like the 87 4Runner acceleration isn't the greatest, but the 99 Runner is fine. So is the 87 pickup. I always figured it was the gearing in the 4Runner that didn't provide the acceleration the pickup does, and it's great for off-road and in snow, so I don't worry too much about it.
Besides, with the lower acceleration, I never managed to shove a drink straw up my wife's nose, like I did in the pickup all the time. She would always bring her drink up to take a sip right when the light changed. The 4Runner didn't have enough OOMPH to cause any straw aiming errors.


Just me, though.
Pat☺
Reply
Old May 27, 2021 | 04:47 PM
  #12  
STC's Avatar
STC
Registered User
 
Joined: May 2021
Posts: 18
Likes: 0
From: Los Angeles County
Current truck is a 06 Taco DC 4X4. I don't like the peeling clear coat. Really inexcusable issue. Truck has been garaged all its life and gets waxed at least 4 times a year.

That and the fact the driver's seat lumbar support knob cuts into the upholstery and you end up with a big hole in the side.

As for design, I don't care for the look of the stock stereo. Later years (09+) are better.
Reply
Old Jun 8, 2021 | 12:30 AM
  #13  
the_supernerd's Avatar
Registered User
20 Year Member
 
Joined: Sep 2002
Posts: 1,563
Likes: 31
From: Sonora, CA
It's funny that so many people complain about the location of the cup holders by the vent. Years ago I remember reading, I think in an early '90s Toyota pickup brochure, that the cup holders were placed there purposely so the A/C would keep your drink cold. I guess that was a good theory that failed in reality!

I have driven my '87 for many years and it is hard to find anything I don't like about it. A/C would be nice, but I always liked the easy access to the oil filter so I never installed it. My biggest complaint is finding restoration parts. I would be nice to have a supplier for our older Toyotas like LMC does for the American trucks.

I actually had more complaints with my 2nd gen Tacoma, including the same problem STC has. My '87 has been kept outside for well over 20 years and the paint is not perfect, but can still be polished up. I waxed and washed the Tacoma regularly, and the clear coat peeled off anyway after about 10 years. It was fairly reliable and got good mileage, but the electronic throttle delay drove me nuts the entire time I owned it.

Last edited by the_supernerd; Jun 8, 2021 at 12:34 AM.
Reply
Old Jun 8, 2021 | 03:15 PM
  #14  
moto809's Avatar
Registered User
5 Year Member
Liked
Loved
Community Favorite
 
Joined: Jun 2020
Posts: 452
Likes: 120
From: CO
Originally Posted by the_supernerd
It's funny that so many people complain about the location of the cup holders by the vent. Years ago I remember reading, I think in an early '90s Toyota pickup brochure, that the cup holders were placed there purposely so the A/C would keep your drink cold. I guess that was a good theory that failed in reality!
Well that would have been great if they had built my truck with A/C!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
carid
Vendor Advertising
2
Apr 16, 2015 12:51 AM
S.Skinner
Items Wanted
1
Nov 5, 2012 01:01 PM
andykrow
86-95 Trucks & 4Runners
4
Oct 26, 2011 07:57 PM
stupidfatkid
FJ Cruiser
0
Jan 21, 2008 11:05 PM
jodynich
95.5-2004 Tacomas & 96-2002 4Runners
1
Jul 16, 2007 09:04 AM




All times are GMT -8. The time now is 06:19 AM.