What is broken on YOUR Toyota
#581
That I know of and that bothers me...horn and temp gauge.
edited to add that I replaced the kitty fart horn and repaired the button contact in the steering wheel.
...leaving the temp gauge which appears to be a far more challenging fix.
Jim
edited to add that I replaced the kitty fart horn and repaired the button contact in the steering wheel.
...leaving the temp gauge which appears to be a far more challenging fix.
Jim
Last edited by Jim_M; 02-14-2011 at 01:02 PM.
#582
Registered User
Join Date: Jan 2011
Location: Ocala Flordia
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
power antenna is broken
moonroof control cover I ripped off being dumb
blown head gasket on 1,3 cylinders no overheating or coolant loss though
manual hubs are needing rebuilt
weird stumble and loss of power at any throttle range
rear windows don't work
no interior except seats from driving into the drink
moonroof control cover I ripped off being dumb
blown head gasket on 1,3 cylinders no overheating or coolant loss though
manual hubs are needing rebuilt
weird stumble and loss of power at any throttle range
rear windows don't work
no interior except seats from driving into the drink
#583
Registered User
Join Date: Jan 2011
Location: newnan georgia
Posts: 288
Likes: 0
Received 0 Likes
on
0 Posts
there hant been 1 week yet that somethin hasn't broke or ceased to function on my truck, in the process of rebuilding motor now...........and I still love the little sob
#586
1) Crack in the windshield from a Colorado plow truck
2) 3 cross country trips pulling the trailer + a generally abusive driving style has finally taken its toll on my Marlin HD W56. 4th gear is quiet but the others all make noise where they didn't before, 5th gear is the worst so I just don't use it anymore. Man, I need to get back into a shop so I can yank that out and swap bearings before rally season starts.
2) 3 cross country trips pulling the trailer + a generally abusive driving style has finally taken its toll on my Marlin HD W56. 4th gear is quiet but the others all make noise where they didn't before, 5th gear is the worst so I just don't use it anymore. Man, I need to get back into a shop so I can yank that out and swap bearings before rally season starts.
#588
Registered User
Join Date: Oct 2010
Location: Longview, TX
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
I like this topic! haha
Well as of right now, I have no side mirrors, one was shattered when I drove by a semi on a small Farm to Market road, and the second I just ripped off wheeling the other day. A friend that was with me was outside at the time, and said, "Hey, man your mirror just broke off." I told him, "Just throw it in the bed."
My climate control not only does not function correctly, the blower comes on at random.
I got some new tires the other day, and one of the techs told me they couldn't balance the tires perfectly because my rims were bent. That was nice to hear.
My tailgate handle doesn't work, so I had to take the panel off and now I pull the mechanism manually.
My rear left wheel cylinder is leaking.
My hood grinds when I pop it open.
Passenger side door doesn't open from the inside.
Driver's side takes a couple of tries to work.
Windows rattle and are hard to roll.
High Beams don't stay on.
Thats all I can think of.
Well as of right now, I have no side mirrors, one was shattered when I drove by a semi on a small Farm to Market road, and the second I just ripped off wheeling the other day. A friend that was with me was outside at the time, and said, "Hey, man your mirror just broke off." I told him, "Just throw it in the bed."
My climate control not only does not function correctly, the blower comes on at random.
I got some new tires the other day, and one of the techs told me they couldn't balance the tires perfectly because my rims were bent. That was nice to hear.
My tailgate handle doesn't work, so I had to take the panel off and now I pull the mechanism manually.
My rear left wheel cylinder is leaking.
My hood grinds when I pop it open.
Passenger side door doesn't open from the inside.
Driver's side takes a couple of tries to work.
Windows rattle and are hard to roll.
High Beams don't stay on.
Thats all I can think of.
![grin](https://www.yotatech.com/forums/images/smilies/grin.gif)
#589
Registered User
Join Date: Nov 2009
Location: los gatos, CA
Posts: 281
Likes: 0
Received 0 Likes
on
0 Posts
my seatbelt retracters are slow/broken so the seatbelts always hang out when you shut the door, and my rear diff leaks, valve covers leak....i wouldnt trade it for anything man i love my little singlecab
#590
Registered User
My AC clutch went out and since it's an 89 (on the "fence" year model) and the AC was a "dealer installed option" and not "from the factory" I'm having a hell of a time finding a replacement. It's the only thing that doesn't work on the rig but I'll be damned if I'm replacing EVERYTHING in the AC system when the stuff in there now just needs a clutch.
#591
Registered User
just rember if your trucks old then chances are you own it dead to rights and i rode a motorized bicycle four highschool no vehicle at all hell didnt even get a driver liscene till after iraq ![smokin](https://www.yotatech.com/forums/images/smilies/smokin.gif)
i have my exhaust hanging up with bailing wire cause the guy that had a new magnaflow exhaust put on before me didnt take into effect the lift and the leaf springs so bam loose exhaust
![smokin](https://www.yotatech.com/forums/images/smilies/smokin.gif)
i have my exhaust hanging up with bailing wire cause the guy that had a new magnaflow exhaust put on before me didnt take into effect the lift and the leaf springs so bam loose exhaust
#593
1. head gaskets leaking
2. Could use t chain while im there (looking for parts truck to rebuild at my own pase and as money allows)
3. mystery short in electrical system
4. o2 sensor is worthless
5. front and rear end both need to be rebuilt with my 4.88 gears and rear locker
6. idler arm is smoked again so i need to make a brace and get my brass bushing
7. windshield is pretty cracked up(minor)
8. both nobs on my window rollers are snapped off due to below zero weather and gloved hands(hopefully come off parts truck)
9. 33's and stock gears are taking a toll on my clutch(marlin upgrade when it finally lets go)
10. e brakes worthless(will go tcase set up when college bills stop screwing me)
11. front warn hubs are ruined and worthless anyway(in the process of rebuilding my stock hubs like i should have from the start)
12. corner light is broken still and dented up drivers fender from the moose crash(minor)
13.small leak in gas tank and im assumining still using the stock fuel filter(both will be replaced along with pump when bed comes off)
14. my exhaust is in pretty extreme need of replacement and relocation
15. im due for a new battery(hopefully can afford a decent one to use with my winch)
16. no front blinkers due to winch and bumper(will relocate to corner lights when corner lights are replaced)
lookin like she might be waiting til i graduate to get put back on the road/trail...gonna be a long 3 years
2. Could use t chain while im there (looking for parts truck to rebuild at my own pase and as money allows)
3. mystery short in electrical system
4. o2 sensor is worthless
5. front and rear end both need to be rebuilt with my 4.88 gears and rear locker
6. idler arm is smoked again so i need to make a brace and get my brass bushing
7. windshield is pretty cracked up(minor)
8. both nobs on my window rollers are snapped off due to below zero weather and gloved hands(hopefully come off parts truck)
9. 33's and stock gears are taking a toll on my clutch(marlin upgrade when it finally lets go)
10. e brakes worthless(will go tcase set up when college bills stop screwing me)
11. front warn hubs are ruined and worthless anyway(in the process of rebuilding my stock hubs like i should have from the start)
12. corner light is broken still and dented up drivers fender from the moose crash(minor)
13.small leak in gas tank and im assumining still using the stock fuel filter(both will be replaced along with pump when bed comes off)
14. my exhaust is in pretty extreme need of replacement and relocation
15. im due for a new battery(hopefully can afford a decent one to use with my winch)
16. no front blinkers due to winch and bumper(will relocate to corner lights when corner lights are replaced)
lookin like she might be waiting til i graduate to get put back on the road/trail...gonna be a long 3 years
#594
Registered User
Join Date: Jan 2011
Location: Minturn, CO
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
Parking brake snapped
front drive shaft broken
temp guage doesnt move
master cylinder leaking
I'm pretty sure there is more but these are first on the list to be fixed
front drive shaft broken
temp guage doesnt move
master cylinder leaking
I'm pretty sure there is more but these are first on the list to be fixed
#596
Registered User
Join Date: Jan 2010
Location: kelowna, BC, Canada
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
cracked windsheild
all ball joints are shot
passangers side tie rod
lots of dents / rust
egr stuck
spindles are as good as they used to be
clutch hydro system only works sometimes
bran new clutch is just about burn off
tranny mounts are done
only have 4 bolts holding up crossmember
tranny leaks
t-case leaks
engine compression is going down hill
burn a lot of oil
tires are wayyyyyyy too illegal ( radials up front bias in the back...dont ask)
rear diff is very slopy
thats all i can think off right now...theres more lol and she's a DD
all ball joints are shot
passangers side tie rod
lots of dents / rust
egr stuck
spindles are as good as they used to be
clutch hydro system only works sometimes
bran new clutch is just about burn off
tranny mounts are done
only have 4 bolts holding up crossmember
tranny leaks
t-case leaks
engine compression is going down hill
burn a lot of oil
tires are wayyyyyyy too illegal ( radials up front bias in the back...dont ask)
rear diff is very slopy
thats all i can think off right now...theres more lol and she's a DD
#598
Registered User
Lets see...
Beds rusting, Grille is busted, Bumper is barely attached
Leaking coolant out the Tchain cover gasket sides
Leaking oil out the top of my tchain cover
Wheels have a jacked up camber..
Brakes need bled..
Exhaust leak infront of muffler (keeping this "mod")
Beds rusting, Grille is busted, Bumper is barely attached
Leaking coolant out the Tchain cover gasket sides
Leaking oil out the top of my tchain cover
Wheels have a jacked up camber..
Brakes need bled..
Exhaust leak infront of muffler (keeping this "mod")
#600
Registered User
Rear main is leaking, Cam seals are leaking, Driver side inner CV boot is slag,
Speedometer is on the fritz, Hood is starting to rust already after i did the bodywork on it le sigh, Seat belts won't retract on their own and usually ends up hanging out the door, Truck still pulls to the left after my alignment, Power steering pump is leaking, Steering box is leaking, Grill is cracked and i only have 3 of those clips that are suppose to hold it in and thats it for now....still love my 4Runner though
Speedometer is on the fritz, Hood is starting to rust already after i did the bodywork on it le sigh, Seat belts won't retract on their own and usually ends up hanging out the door, Truck still pulls to the left after my alignment, Power steering pump is leaking, Steering box is leaking, Grill is cracked and i only have 3 of those clips that are suppose to hold it in and thats it for now....still love my 4Runner though
![grin](https://www.yotatech.com/forums/images/smilies/grin.gif)