General Vehicle Related Topics (Non Year Related) If topic doesn't apply to Toyotas whatsoever, it should be in Off Topic
Sponsored by:
Sponsored by:

Roll on Bedliner

Old Nov 9, 2008 | 07:41 PM
  #1  
1980 4x4's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 17
Likes: 0
From: Austin,TX
Roll on Bedliner

I was wondering how the Herculiner or Bondo roll on bed liner kits work. I wanted to repalce the carpet in my first gen with some type of bedliner. Are they easy to use and how do they hold up? Thanks Any info will be appreciated.
Jacob
Reply
Old Nov 9, 2008 | 08:10 PM
  #2  
Swansen's Avatar
Registered User
 
Joined: Jan 2007
Posts: 455
Likes: 0
From: Michigan
? the post below yours is "roll on bedliners" to be that guy a search might have been a good idea. To beat a dead horse, unless you put on about 4 coats, you won't be happy with the results and won't get what would be any real bedliner like results. Also, prep, prep, and prep. one gallon will get around 2 coats on a bed, i wouldn't use anything less that 4 coats, and i have experience, the stuff goes on really thin. Its a whole day affair. Granted, if you spray it on, which is the preferred method, it will go on thicker. I'm sorry if i sounded coarse, but there really just was a post on this same topic today.

Last edited by Swansen; Nov 9, 2008 at 08:12 PM.
Reply
Old Nov 10, 2008 | 07:08 AM
  #3  
1980 4x4's Avatar
Thread Starter
Registered User
 
Joined: Aug 2008
Posts: 17
Likes: 0
From: Austin,TX
thanks for the info. Ya i just realized right after I posted that i should have searched first. My bad.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Big Little Bear
Pre 84 Trucks (Build-Up Section)
230
Nov 13, 2023 11:42 AM
rubrsidedwn
84-85 Trucks & 4Runners
6
Jul 7, 2016 07:28 PM
83yotastockR
86-95 Trucks & 4Runners (Build-Up Section)
11
Nov 10, 2015 06:54 AM
PNW94Runner
86-95 Trucks & 4Runners
3
Sep 29, 2015 02:55 PM
PureTacoma_Tundra
PureTacoma_Tundra
0
Sep 24, 2015 12:14 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 07:06 AM.