rebuilt 22r started now won't start
12-23-2010, 08:17 AM
#1
Registered User
Thread Starter
Join Date: Dec 2010
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
rebuilt 22r started now won't start
Hello,
I did not see any similar posts for this problem and am looking for answers. I had an 89 22r rebuilt and put it in my 85 truck I started it up initially for about 30 seconds and was checking the timing I noticed that it was hitting slightly after 0 deg so I stopped it and pulled the distrubter to rotate it and now it looks like it is hitting right at 0 deg but now the motor won;t start. any help? I am wondering if I washed the prelube off with too much fuel or somthing or if I did not let it run long enough the first time.
your help is appreciated
I did not see any similar posts for this problem and am looking for answers. I had an 89 22r rebuilt and put it in my 85 truck I started it up initially for about 30 seconds and was checking the timing I noticed that it was hitting slightly after 0 deg so I stopped it and pulled the distrubter to rotate it and now it looks like it is hitting right at 0 deg but now the motor won;t start. any help? I am wondering if I washed the prelube off with too much fuel or somthing or if I did not let it run long enough the first time.
your help is appreciated
Thread
Thread Starter
Forum
Replies
Last Post
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
07-09-2015 07:55 AM
