Lug nut question: minimum # of thread wraps needed for safety?
Apr 11, 2009 | 03:07 PM
#1
Thread Starter
Registered User
Joined: May 2007
Posts: 636
Likes: 0
From: used to be so. cal. now Indy
Lug nut question: minimum # of thread wraps needed for safety?
I have a set of LC wheels laying around with no tires, they are the ones which using cone shape lug nuts(conical, without washer). currently I have the limited edition wheels on with the mag lug nuts(with washer), for DD.
out of curiosity, I tested the LC wheels today because of the bigger Tundra brakes. they cleared the calipers just fine, but I noticed the cone lug nuts only have 5-3/4 wraps around the wheel lugs.
will that be enough for driving safely? I'm planning getting some 265 size MT tires on them.
out of curiosity, I tested the LC wheels today because of the bigger Tundra brakes. they cleared the calipers just fine, but I noticed the cone lug nuts only have 5-3/4 wraps around the wheel lugs.
will that be enough for driving safely? I'm planning getting some 265 size MT tires on them.
Apr 11, 2009 | 03:43 PM
#2
You generally want at least one stud diameter worth of thread engagement:
- http://customwheelsmarket.com/wheelinin.html
So on an M12x1.50 stud, 12mm dia. / 1.50 thread pitch = 8 turns
- http://customwheelsmarket.com/wheelinin.html
So on an M12x1.50 stud, 12mm dia. / 1.50 thread pitch = 8 turns
Thread
Thread Starter
Forum
Replies
Last Post
