Wheel backspace 2nd gen 4runner
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: Versailles, KY
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
Wheel backspace 2nd gen 4runner
Didn't know if anyone knew the backspacing of a factory wheel on a '91 4runner-- May try to upgrade rims one day soon, and would really only like to be an inch or so wider than factory. I'm hoping this will give me a little wider stance, but not too wide. Thanks
#3
Contributing Member
I thought about 4 1/2 inches
Measure yours like this
see post 13 in this
https://www.yotatech.com/forums/f180/15-x-7-wheels-79939/
The solid axle trucks are about 3 1/2 inch BS (so on yours they would stick out about 1 inch farther on each side)
Measure yours like this
see post 13 in this
https://www.yotatech.com/forums/f180/15-x-7-wheels-79939/
The solid axle trucks are about 3 1/2 inch BS (so on yours they would stick out about 1 inch farther on each side)
Last edited by Yoda; 08-19-2006 at 09:35 AM.
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
06-01-2021 01:51 PM
skoti89
Off Road Trip Planning, Expeditions, Trips, & Events
0
07-06-2015 07:45 PM
Steezy96yota
86-95 Trucks & 4Runners (Build-Up Section)
1
07-06-2015 10:00 AM