Newbie Tech Section Often asked technical questions can be asked here
Sponsored by:
Sponsored by: CARiD

Rim Swapping, 03 Taco to 88 4Runner

Old Nov 16, 2007 | 05:48 PM
  #1  
phildelfino's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 872
Likes: 1
From: Reno, NV
Rim Swapping, 03 Taco to 88 4Runner

--------------------------------------------------------------------------------

I own an 88 4Runner SR5 with 15" rims. I have a line on some rims from an 03 Tacoma 4x4, SR5 with 16" rims. Early measurements seem to indicate the same bolt pattern. What is the backspacing like on these different models, anybody know?
Will these 16" 03 Taco rims fit on my 15" 88 4Runner? Will there be any problems? Wheel spacers needed? I think if wheel spacers are all that's needed, I am going to buy them and then look for some good, 33" tires.
Thanks for your replies. Phil
Reply
Old Nov 16, 2007 | 05:53 PM
  #2  
INFINITY's Avatar
Registered User
 
Joined: Apr 2006
Posts: 1,043
Likes: 1
From: Show Low, AZ
https://www.yotatech.com/forums/f115...runner-124463/
hope this helps
Reply
Old Nov 16, 2007 | 06:15 PM
  #3  
phildelfino's Avatar
Thread Starter
Registered User
 
Joined: Aug 2007
Posts: 872
Likes: 1
From: Reno, NV
Thanks, I read them all. Seems like my BS is 3.75" and I need to get the BS from the 03 Taco rims. I will measure both to be safe.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
toyotamonster
3.4 Swaps
7
Apr 16, 2020 06:02 PM
mskalmus
86-95 Trucks & 4Runners
9
May 28, 2017 07:51 AM
MTLroadierunner
86-95 Trucks & 4Runners
0
Jul 6, 2015 12:17 PM
HRDC0R19
86-95 Trucks & 4Runners
3
Jul 5, 2015 06:43 PM


Thread Tools
Search this Thread

All times are GMT -8. The time now is 11:23 AM.