remove hoses? name this part?
#1
remove hoses? name this part?
i'm pulling my intake but i can't get to the last bolt closest to the rear ... i want to remove the two hoses to get better access to the bolt ... do you know what they are? thanks

and there is one other part that seems to be just hanging under the throttle, looks like it should be hooked to something ... do you know what this is for? thanks


and there is one other part that seems to be just hanging under the throttle, looks like it should be hooked to something ... do you know what this is for? thanks

#2
In the first pic, those two lines are AC lines. I recommend NOT unbolting those, unless you want to recharge your system afterward.
The second and third pic look like the check valve on the vacuum lines. If its orange, that's what it is. Can't tell too well from the pictures. There should be another vacuum line on the other end of it. The vacuum diagram under your hood should show you what line goes where. On the diagram it'll say "orange" right next to a rectangle with a line coming out of each end, that's the check valve.
I have a 3VZE, but that check valve should still be the same.
The second and third pic look like the check valve on the vacuum lines. If its orange, that's what it is. Can't tell too well from the pictures. There should be another vacuum line on the other end of it. The vacuum diagram under your hood should show you what line goes where. On the diagram it'll say "orange" right next to a rectangle with a line coming out of each end, that's the check valve.
I have a 3VZE, but that check valve should still be the same.
#3
Interesting, so there should be a tube on the other side of that check valve... it's just taped closed ... I wonder how long it's been like that ... there's no vacuum diagram under my hood
THanks!
Thread
Thread Starter
Forum
Replies
Last Post
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
Jul 9, 2015 07:55 AM
skoti89
Offroad Tech
3
Jul 8, 2015 12:05 AM



