Hey everyone I have a quick question. And yes I looked and looked for the answer on here and did not find it.

I want to lift my stock 90 truck so i can fit some 33's on so I can do a few more trails.. So how much of a lift do i need to buy? I think it's a 2 1/2 inch lift. I need but I just wanted to double check.

 

No idea. I went 4" and 35's and everybody seems to be lookin up at me...wierd.

 

Not much, I got creative with a hammer, saw, and wrench on the torque rods to run them on my stock, when my truck was stock.

 

@muddpigg I want to keep the stock look of the body so I don't want to cut and chop.

 

If you are planning on running that setup offroad your body won't keep the stock look long.

 

Yea your right. But at the sametime I still don't really want to cut and chop...

 

Relax in time that will change too:-) It starts with a few body pieces here and there and well I'm not sure where it ends. Oh well.

 

i'm runnin 35's with a 3 inch body lift with just a little bit of hammering. 2 inch would probably work for 33's

 

I have 31's on my stock 94 that don't rub at all i could clear and run 35's on my 95 4runner with a 4 inch lift so i would say 2 inches will do ya just fine.

 

Depends on your tire and rim package as well as lift but 2" of lift will clear 33" tire.

Try here:
http://www.wabfab.org/IFS-Lift-Kits/...-products.html

:wabbit2:

 

Thanks everyone I will doing a 2 inch lift then.

 

I would get a locker before going up another tire size. Youll notice that over larger tires.

And if its a 90, I fit 33X12.5 on my stock truck with only hammering the pinch weld down. Didnt rub at all. Pic below from back in the day.

 

Seems to me like this has been asked before.

 

bj spacers and shackles!

 

i fit them with bjspacers and AALs. if you wana go 33 10.50s, you fit them on stock backspaced wheels with no lift no cut. or you cud do like RE RE and give the pinchweld some lovin. hey RE RE, show this feller how to clear 35 12fiddys with no lift

 

^^^ you have my attention

 

haha yea its pretty wild, and it looks great.

 

video after I put the spool in.

http://www.youtube.com/user/mrcox87#p/u/14/V-Aii6UJ0zw

Have plenty of pictures and a build up thread somewhere on here. I have enough of my own threads, I dont need to clog up smalltownbigtoys thread.