Bilstein and OME
Mar 25, 2010 | 10:56 AM
#1
Thread Starter
Registered User
Joined: Mar 2010
Posts: 7
Likes: 0
From: Alberta, Canada
Bilstein and OME
Hello all,
I have a 96 Tacoma 4x4 V6 that I am going to install some new suspension under. I have ordered a set of Bilstein 5100 adjustable shocks for the front, along with a set of OME 881 springs to go over them. In the rear I ordered a set od Dakars, but since OME doesn't make leaf springs for the 95.5-97 Tacoma's, I ordered a set for the 98 and up and was told by ARB/OME to remove the 3rd leaf from the top.
My question to anyone out there is: Is this a good setup and will it work???
Anyone out there running this setup on their 95.5-97 Tacoma?
What setting should I set the fronts at in order to match the rear?
Thanks in advance for any advise or recommendations,
Tye
I have a 96 Tacoma 4x4 V6 that I am going to install some new suspension under. I have ordered a set of Bilstein 5100 adjustable shocks for the front, along with a set of OME 881 springs to go over them. In the rear I ordered a set od Dakars, but since OME doesn't make leaf springs for the 95.5-97 Tacoma's, I ordered a set for the 98 and up and was told by ARB/OME to remove the 3rd leaf from the top.
My question to anyone out there is: Is this a good setup and will it work???
Anyone out there running this setup on their 95.5-97 Tacoma?
What setting should I set the fronts at in order to match the rear?
Thanks in advance for any advise or recommendations,
Tye
Thread
Thread Starter
Forum
Replies
Last Post
WTB[PacNorWest]: Old Man Emu Torison Bars
A2theK
Axles - Suspensions - Tires - Wheels
2
Oct 14, 2015 07:10 AM
JookUpVandetti
86-95 Trucks & 4Runners
10
Sep 30, 2015 08:58 AM
FS[PacNorWest]: 1987 4Runner SAS, 22RE, 5Spd, Dual Cases, etc
toyotasaurus
Vehicles - Trailers (Complete)
0
Sep 24, 2015 03:30 PM
