Newbie Tech Section Often asked technical questions can be asked here
Sponsored by:
Sponsored by: CARiD

Advice needed!! 88 4runner roll over damage-fix it or?

Thread Tools
 
Search this Thread
 
Old Sep 2, 2011 | 05:14 AM
  #21  
88-Runner-88's Avatar
Thread Starter
Registered User
 
Joined: Feb 2011
Posts: 63
Likes: 0
From: Tacoma, Wa
well about a week after getting my licence me and some friends thought it would be fun to go wheeling. And everything was going fine but my friends wanted to have a donut competition before we left, And me being inexperienced plus having a top heavy rig flipped it while doing donuts because my rear tire caught in a pothole...

Last edited by 88-Runner-88; Feb 13, 2012 at 06:28 AM.
Reply
Old Sep 2, 2011 | 06:55 PM
  #22  
mwc0404's Avatar
Registered User
 
Joined: Apr 2011
Posts: 187
Likes: 0
From: (The Real) Buckhead, GA (Not Atlanta)
Originally Posted by McTibbs
Check for water leaks around the A-pillar. If you dont have any leaks via the windshield or door then chances are the structural integrity of the pillar has not been compromised (i.e. bent, twisted). Looks mostly cosmetic from the picture.
I can guarantee those dents wont pull out though. I spent 3 years doing PDR and pillars are a PITA to even fix small dings on. Very rigid metal.
Agreed, ive done alot of body work myself and i would say if you feel comfortable with it try to pull what you can and you can bondo the rest if you have to have it fixed a bit or you could just leave it and drive the hell out of it. Just be careful if you try donuts again op
Reply
Old Sep 2, 2011 | 08:29 PM
  #23  
baddest94's Avatar
Registered User
 
Joined: Jan 2011
Posts: 353
Likes: 0
From: va
Im with everyone else dont look all that bad in the pics if you aint to worried on looks just drive it dents and scratches just ive you a story to tell when someone askes bout it LOL
Reply
Old Sep 2, 2011 | 09:45 PM
  #24  
fork's Avatar
Registered User
 
Joined: Sep 2006
Posts: 949
Likes: 3
From: i ka moana
thats it??? run it. i would only consider bondo if it was bad, but that doesn't look too bad at all. just make sure to prevent rust, especially by the windshield. they leak like HELL there without dents to hasten the process
Reply
Old Sep 3, 2011 | 06:03 PM
  #25  
85TurboRunner's Avatar
Registered User
 
Joined: Aug 2004
Posts: 2,077
Likes: 1
From: Vancouver, WA
Might as well drive it down to Vancouver and give it to me.

With that amount of damage it should be taken off the road ASAP. I'll give it a good home.
Reply
Old Feb 12, 2012 | 05:48 PM
  #26  
88-Runner-88's Avatar
Thread Starter
Registered User
 
Joined: Feb 2011
Posts: 63
Likes: 0
From: Tacoma, Wa
its been awhile..

sorry for taking so long to tell you guys what i did to it. but i did end up keeping it an fixin it up... a bit. the pillar and rear quarter panel were both repaired for about 500 total. after that i did a couple more things to it...

New bumpers:








..And after getting tired of looking at the different colored panels and repair areas I decided to do this..







I havnt put the bumpers back on yet but ill put more pictures up when i do.. It was painted with rustoleum rattle cans, about 12. also thinking about painting the rims too ..

Let me know what you think!!
Reply
Old Feb 12, 2012 | 05:58 PM
  #27  
wii_tarded's Avatar
Registered User
 
Joined: May 2008
Posts: 1,063
Likes: 2
From: Knoxville, TN
Looks good!!!
Reply
Old Feb 12, 2012 | 07:01 PM
  #28  
88-Runner-88's Avatar
Thread Starter
Registered User
 
Joined: Feb 2011
Posts: 63
Likes: 0
From: Tacoma, Wa
Does anyone know how I can move this thread to the build up section??
Reply
Old Feb 12, 2012 | 07:26 PM
  #29  
pholife's Avatar
Registered User
 
Joined: Feb 2011
Posts: 302
Likes: 0
From: Huntington Beach, CA
great job! my vote its a keeper!
Reply
Old Feb 12, 2012 | 07:42 PM
  #30  
skoti89's Avatar
Registered User
 
Joined: Jul 2010
Posts: 538
Likes: 6
From: Carson City
right on man!!!! was wondering what yhou did with it! keep it up. these guys are gems and are worth fixing yourselve. very easy to work on
Reply
Old Feb 13, 2012 | 03:51 AM
  #31  
bigt's Avatar
Registered User
 
Joined: Nov 2007
Posts: 3,278
Likes: 2
From: chippawa niagara falls ontario
WOOHOO NICE JOB!!

my hilux is currently waiting for insurance... i spend 2 grand fixing my injection pump and coming home from the mechanic i got kinda t boned...guy running a red during a crazy snow storm..

def worth fixing a truck if it runs good cause they dont make them like this anymore!
Reply
Old Feb 13, 2012 | 05:14 AM
  #32  
Bassmastry101's Avatar
Registered User
iTrader: (1)
 
Joined: May 2008
Posts: 738
Likes: 0
From: Gainesville, GA
Does the windshield leak at all since you fixed it?

$500 isn't too bad for the repairs. Looks great!

Last edited by Bassmastry101; Feb 13, 2012 at 05:17 AM. Reason: Just realized there was a 2nd page.
Reply
Old Feb 13, 2012 | 06:24 AM
  #33  
88-Runner-88's Avatar
Thread Starter
Registered User
 
Joined: Feb 2011
Posts: 63
Likes: 0
From: Tacoma, Wa
Thanks for all the positive feedback guys!
and sorry to hear about your truck bigt , is it salvageable?

Originally Posted by Bassmastry101
Does the windshield leak at all since you fixed it?

$500 isn't too bad for the repairs. Looks great!
No the winshield does not leak at all..

Oh, and i forgot to mention I just put these new hubs in place of my old auto ones and they are 100% better.. probably because the auto ones were broke!

Reply
Old Feb 13, 2012 | 08:19 AM
  #34  
skypilot's Avatar
Registered User
15 Year Member
iTrader: (1)
 
Joined: Sep 2010
Posts: 1,151
Likes: 6
From: Peekskill, NY
Thats not bad at all! Mine is worse, and I will fix that one since its rust free.

I say fix it and drive it!
Reply
Old Feb 13, 2012 | 03:34 PM
  #35  
88-Runner-88's Avatar
Thread Starter
Registered User
 
Joined: Feb 2011
Posts: 63
Likes: 0
From: Tacoma, Wa
how do you guys think it will look if i paint those stock rims black? has anyone done it or seen it done? Pics?
Reply
Old Feb 13, 2012 | 05:08 PM
  #36  
88-Runner-88's Avatar
Thread Starter
Registered User
 
Joined: Feb 2011
Posts: 63
Likes: 0
From: Tacoma, Wa
Official build

Moved all this and a little more to a new build thread . Here is the link!! https://www.yotatech.com/forums/f199...ild-up-249267/
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
BigArt70
Early Land Cruisers
4
Jun 30, 2015 09:51 PM
Gamble_STi
Items Wanted
0
Jun 27, 2015 07:54 PM
Old Red 94
86-95 Trucks & 4Runners
3
Jun 16, 2015 08:32 PM
JaredL
84-85 Trucks & 4Runners
3
Jun 16, 2015 04:47 PM
HALMAN
95.5-2004 Tacomas & 96-2002 4Runners
3
Jun 14, 2002 09:02 PM




All times are GMT -8. The time now is 01:11 PM.