Ok heres the deal. I bought my 4Runner with a blown motor and purchased a junk yard motor to go into my 4runner. I decided to rebuild the junk yard motor because I didnt want to take any chances of it blowing up or breaking down. The motor I bought came out of a 2wd truck and I have a 4wd 4runner so the oil pans, windage trays, and oil pickup tubes are different between the two. The oil pan and the pickup tube off the blown 4wd motor are still good but the windage tray is beat to hell since 2 pistons and rods decided to go threw it.

Here are my parts questions. Where can I find a 4wd 3VZE windage tray? And where can I find a replacement knock sensor wire connector that goes from the knock sensor, between the intake manifold and cylinder head to the main engine wiring harness?

Please dont tell me to check eBay because eBay does not have them.
Thanks

 

I have them. P.M. me and we can work something out. I have a whole 3vz minus the heads available.

Knock sensor, thats a dealer item.

 

I will have them, but depending on yout year of truck (mines form a 93) the knock sensor wire connector plugs vary. I have a complete heads down 4X4 3.0L thats got 280K on it and came from a daily driver. shoot me a PM if your interested I'm in Toronto, Ontario