Want to buy some misc stuff
Nov 28, 2011 | 12:49 PM
#21
yeah, i know. this is more of a passive request, as in if anyone has one, i'll think about it. if it's a good deal, i'll get it. and if i don't need it, no worries.
i'll have some more free time coming up soon, so the list should start to dwindle
thanks guys!
i'll have some more free time coming up soon, so the list should start to dwindle
thanks guys!
Jan 24, 2012 | 11:21 AM
#23
Registered User
Joined: Jan 2012
Posts: 279
Likes: 1
From: Garner,NC
As for your air tank needs, why not try Harbor Freight Tools??
http://www.harborfreight.com/12-volt...sor-96068.html
Should be pretty easy to buy a storage tank and make it a on demand air supply. I plan to do something similar for an on demand air supply for mine.
http://www.harborfreight.com/12-volt...sor-96068.html
Should be pretty easy to buy a storage tank and make it a on demand air supply. I plan to do something similar for an on demand air supply for mine.
Last edited by Lycanistic; Jan 24, 2012 at 11:23 AM.
Jan 24, 2012 | 11:22 AM
#24
this:
all the parts above are sort of a side-project that i'm gathering parts for, so whenever i get around to it, it'll get done. i'll probably make my own cb antenna mounts someday...
Air delivery: 0.88 CFM
Last edited by irab88; Jan 24, 2012 at 11:24 AM.
Apr 6, 2012 | 09:25 PM
#28
Contributing Member
Joined: Mar 2003
Posts: 11,334
Likes: 0
From: COTKU,Ontario,Canada
Why do you want a cluster to destroy? just curious...
btw do you still have that "neat turn signal effect" circuit installed on Red? if so how's it working?
got most of the goodies to do two for myself except for the caps... looks like I'm going to have to go parallel too... can't get a 6800UF in the right style around here... and I don't want to mail order...
btw do you still have that "neat turn signal effect" circuit installed on Red? if so how's it working?
got most of the goodies to do two for myself except for the caps... looks like I'm going to have to go parallel too... can't get a 6800UF in the right style around here... and I don't want to mail order...
Last edited by aviator; Apr 6, 2012 at 09:28 PM.
Apr 7, 2012 | 05:04 AM
#29
i want to do 2 thiings with it-
1) see how it works, how to adjust, take reference pics, etc.
2) try and make my own cluster. if it's an electronic speedo, i might be able to plug-n-play something
the circuit works just fine! note: don't use hot glue. it melts on the exhaust side. use something like goop, silicone, etc. or a box. caps in parallel will work just fine (obviously since i'm using them), so long as they add up to about 6800
1) see how it works, how to adjust, take reference pics, etc.
2) try and make my own cluster. if it's an electronic speedo, i might be able to plug-n-play something
the circuit works just fine! note: don't use hot glue. it melts on the exhaust side. use something like goop, silicone, etc. or a box. caps in parallel will work just fine (obviously since i'm using them), so long as they add up to about 6800
May 3, 2012 | 06:40 PM
#31
How many dash blanks are you looking for?
-on board air stuff:
-air manifold
-pressure relief valve, ~180 psi
misc:-pressure relief valve, ~180 psi
-set of 5 31x10.5-15's, good tread, no plugs or sidewall damage
-gauge pillar, 2 or 3 slots
-wiring harness/pigtail/switch for e-locker
-blank dash inserts
-gauge cluster, working or not, it will be getting destroyed (89-95pu, 90-95fr)
i'm located in 22309, and can drive/meet somewhere about an hour away. i have paypal and cash-gauge pillar, 2 or 3 slots
-wiring harness/pigtail/switch for e-locker
-blank dash inserts
-gauge cluster, working or not, it will be getting destroyed (89-95pu, 90-95fr)
May 4, 2012 | 04:00 AM
#33
Thread
Thread Starter
Forum
Replies
Last Post
Jcrawl94
84-85 Trucks & 4Runners (Build-Up Section)
10
Oct 24, 2015 04:34 PM
FS[PacNorWest]: 1982 Toyota Long Bed Trailer
58rennur4
Vehicles - Trailers (Complete)
2
Aug 4, 2015 08:49 AM
