Janet,

No problem. I totally get wanting to stick with a stock radio. I wish y'all the best of luck on your hunt.
I assume you mean't to say that he wants the clock? If that's the case, pm me with your address and I would be happy to mail it to you free of charge.

Regards,

Sam

 

I have a relatively stock 83 4x4 that I am slowly restoring, but have some needed items that seem to be hard to come by. If anyone has the following parts, please let me know.

-Front turn signals --can't find ones to fit the 1983 4wd bumper.
- Coolant & wiper fluid overflow tank(s)--mine is beginning to deteriorate.
-Gas pedal.

Any help will be appreciated, thanks!

 

we got bumpers

 

In case anyone is missing the blue Transfer Gear Instructions on your glove box, here is a link where you can buy some.
https://www.etsy.com/shop/BLVinyl

I found Angie on Facebook and she has a website full of Toyota stickers. I told her what i needed and she went out and found a first gen to compare the sticker and got it made within a couple weeks. I think it came out great. I wouldn't doubt if you can find these being made somewhere else but i wasn't having much look finding them so just trying to help out others if they too need one. I bought 3 to keep a few on file cause you just never know haha

 

why was this thread removed from "sticky " ?

 

Hello Fellow Toyota Enthusiasts,

I am looking for a EACV for the the air injection system from a 1982-84 22r. Anyone out there have one they would be willing to sell? Perhaps you are lucky and were able to de-smog (oh, if only...). See below for examples. Thanks!!!

 

I'll check in the morning, might have one.

 

Awesome! Thanks!

 

No luck. I guess I let someone else have it at some point. Sorry

 

No worries. Thanks for looking!

 

Will one from an 81 22R California truck be of use. Can't say it is any good but you can have it, just pay shipping.

 

Lon,

To be honest, I'm not sure. In my research of the very limited information available about these it seems that the one I need would come from an 82-84 22r but like I said, there's not much info out there. If it's not too much of a pain, would it be possible to for you to snap a picture of the unit and it's electrical connector for comparison? If that's not possible no worries. Regardless, thanks so much for your response!

Thanks again,

Sam

 

Sam, I checked mine again and there is no electrical connector, so I assume there is a difference. Mine has vacuum connections on the top. Sorry, Bro

 

Ah, That sounds different indeed. Thanks again for checking and for your generous offer.

Take Care,

Sam

 

 

I appreciate you taking the time to look. I can't wait until I can de-smog. It's ridiculous that the "emissions equipment" malfunctioning is making it fail smog. When it wasn't working at all it passed just fine! I've been musing about ways to just shut the system down while keeping it installed for appearances.

Thanks again,

Sam

 

chrome wrap .. NOW available .. Spectra chrome paint also available

 

Looking for a few items for my 1980 Pickup.

From everything that I can see the Dash insert for the 1979 and 1980 are different from the 1981, as well as the 82-83. Is this the case? My heat/AC control box sticks through and sits flush with the dash. If that is the case, then I am looking for a 1981 dash insert with the woodgrain.

I need the vents for the dash panel by the front window.
I am looking for the stock radio.
Stock speakers and the metal parts that hold the speaker panels onto the door.

I have had the control for the AC break off. Not sure if this can easily be repaired or if I need to get a new unit.
Rear View Mirror for Tan color interior. Complete assembly.
Tan color visors.
Side Marker light rubber surrounds.
Sliding rear window
I also need the bolts to attach the plastic trim at your feet to the panel for both sides. This holds the panel in place and the carpet.

Thank you very much for looking through my want list.

 

@Racer4Life I have a stock radio I've been sitting on for years if you want it