We have been discussing getting a front bumper made for the 4th Gens by Shrockworks. They seem positive about doing it, if we are positive about buying it. We started a thread on toyota120.com to get a list of serious buyers. See
http://www.toyota120.com/forum/showthread.php?t=332

More details can be found there. They have done a lot of work for the XTerra guys, and the feedback I have received was extremely positive. Below are some pictures of the bumpers they make for the Xterra.

Hopefully we get enough interested to get the ball rolling. And oh yeah, we will need somebody in Houston, TX to go down to their shop for them to do the R&D measurements, etc.

Some pics of their new generation bumpers on the Xterra.

 

FWIW, you can't insert pictures from webshots, they dont allow it. just link to the album

btw, i looked at those bumpers on the xterras, and they look awesome! hopefully this works out for you 4th gen folk...

 

nice steel. too bad about the street treads that the X's are wearing...

 

pics work fine for me

 

red X's here.

 

that's because you've been to the webshots site and you have the cookies or whatever on your computer already. if someone (such as robinhood) hasn't already seen the pics, they won't. just saying...

 

ok, got it

http://community.webshots.com/album/496664101xhTenn

 

So far we have still not met the number of serious buyers required to get the project off the ground. More info can be found in this post
http://www.toyota120.com/forum/showp...88&postcount=4

So to any of you guys who are serious about getting a plate type bumper for the 4th Gens, please check out this thread and get on board.
http://www.toyota120.com/forum/showt...2&page=1&pp=20

 

Ok guys were are still a couple people short to get this project of the ground, don't let us miss out on a great opportunity to get some quality bumpers in production for the 4R.

 

This bar looks awesome!

Can't wait.

 

There are a number of us who would like to utilize Shrockworks. This could be a great opportunity to have front/rear bumpers (tire carrier!), skids, sliders, and who knows what else made by another quality vendor.

It's all about options; the more vendors we support, the better variety of products we get.

Bump for interest!!

 

Looks like these guys do a great job of accentuating the lines of the vehicles with their bumpers. Looks like good stuff to me. Git-r-done

 

As the title says. This is going to happen now. So if you want to get on board sign up on give them a call. Stil a few open spots.

See
http://www.toyota120.com/forum/showthread.php?t=332
http://www.toyota120.com/forum/showthread.php?t=342

 

This is awesome. I am so excited. Have placed my order and can't wait to take delivery.

Thanks to everyone who had a hand in putting this together.

 

What are we looking at price-wise? Did I miss that?

 

The info is in the links above. AT this point of the process Jim estimated the price to be $750-$1000. As the development goes underway he will be able to pin down the price better. Currently the 05 Xterra bumper is $700 or so, and the 4R shouldn't be that much more expensive. However we will only know as the process moves forward.

 

Update - There is an initial draft of a CAD drawing and some more photos of Shrockworks bumpers at the above links.

 

Prototype done!!!!


http://www.toyota120.com/forum/showt...=3976#post3976

 

Here are some pics of the prototype:

 

Soooooo sweeeeeeeeeeeeet. Can't wait to be wearing one.

Thanks guys.