i am installing my "tortis built" transfer case in the morning, and a tach mount that uses the rear view mirror mount, and the trick is to still be able to use the rear view mirror. that should be enough for this weekend, oh, and wait for Djlarroc to post pics of his last coat of paint

 

1. I am yanking as many parts as I can off of the 90 4runner.

2. I need to take the 93 4runner down to the heads to change the HG's.

 

that is not a project, it is a mission. good luck,

 

(Crying) Caulking vinyl trim on my house and splitting wood , anyone want to help hehe

 

if you were a little closer i would do all the caulking for ya. i can work a caulk gun, i do about 4-5 tubes a day. cutting wood, well i cut when i camp and that is it. enjoy.

 

being the 1st guy on yotatech (to my knowledge) replace a valve stem seal on the 22re w/out removing the head.

 

Switching out the 3spd (dropped 3rd and 4th gears) in my mazda pickup for the 5spd in a parts truck i have. Then also waiting for my defective clutch to be repaired and shipped back from centerforce so i can pull my taco back apart and install that thing again.

 

Itoyota, write up and pics please. you just replacing one?

 

what happened to the centerforce clutch?

 

Not doing anything this weekend except college homework. Next weekend I'm tinting the windows on my taco, then doing a coolant flush on the 4Runner and probably ordering my body lift from RB.

 

funny thing about homework. in school i did enough to get by. now, when i do a mod or a project i read for weeks on that subject and learn as much as i can before i do anything.

 

Haha.....ya I do the same thing!

 

recovering from appendectomy, going to the UT vs Georgia game, and hwk

 

Ouch!

 

ive got another thread on the R&R and i will be posting a detailed tech write up. hope it helps some poor boob like me not have to spend hours thinking and frustrating themselves over such a small yet important seal.

 

Watching the Canucks season opener vs. San Jose tonight, finishing building a fence tomorrow...I hope the rain holds off.

 

X2 on the ouch. speedy recovery i hope for ya.

 

Bah... You guys have girly weekends planned

This is the thanksgiving long weekend in the great white north, so it's big project weekend!

My plan... We'll see how it goes, is get the whole drivetrain out of my wrote-off 88 4runner (22re / auto) and get em into the 87 4runner (22re - burns more oil than gas / 5spd). And be driving it to work tuesday...

May be a bit ambitious, guess we'll see where we sit on sunday decide if I'm swapping the transmission this weekend, or just the engine...

And of course now it's forcasting snow/rain all weekend - Time to dig out the tarps!

 

i helped my grandfather every summer on his small ranch, and it seems 50% of that time was building or repairing fence. i miss those days with him, hated the fence building with a passion.

 

Understatement. It happened Monday morning, went to class then something felt horribly wrong. Ended up in the hospital and under the knife. The good thing is i caught it early, my teachers are super cool, and i am now caught with everything (thanks to my hydraulics teachers for tutoring me for an hour after class today).