What transmision?
Oct 6, 2008 | 11:36 PM
#2
Contributing Member
Joined: Jan 2006
Posts: 899
Likes: 0
From: Summit County, Colorado
Post some info about your rig in your sig line, so that we know what we're dealing with.
If you have the 3.0 V6 manual (R150F), then you will be able to bolt it directly to the 3.4, using the 3.4 flywheel and clutch plate, with a 3.0 throwout bearing.
If you have an automatic, then you are going to have to figure out how you are going to address the electronic issues that will be entailed in the conversion.
Do some serious homework in the 3.4 swap section, and you should have a better idea about what your particular project will need.
If you have the 3.0 V6 manual (R150F), then you will be able to bolt it directly to the 3.4, using the 3.4 flywheel and clutch plate, with a 3.0 throwout bearing.
If you have an automatic, then you are going to have to figure out how you are going to address the electronic issues that will be entailed in the conversion.
Do some serious homework in the 3.4 swap section, and you should have a better idea about what your particular project will need.
Thread
Thread Starter
Forum
Replies
Last Post
ChildrenOfBodom
95.5-2004 Tacomas & 96-2002 4Runners
1
Sep 25, 2011 03:24 PM
przemo76
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
3
Mar 18, 2010 01:43 PM
