fork

i recently acquired an 89 1st gen 4runner which came with a bracket lift up front. the rear however is on blocks, the spring packs are flat, and the shocks are obviously shot. so 3 strikes and its out. what do you guys think I should stick on there to get it back up again (without blocks)?

there's a stipulation though I use a motorcycle carrier in the 2" receiver to haul my dirtbike around (about 235lbs out a couple feet from the bumper). the ride right now is terrible. what are my options within a reasonable price range? HD springs? air shocks? air bags?

dropzone

iTrader: (6)

I would put new springs in the back and get a trailer.

one option would be to search 'Zuk Mod'

ZUK

iTrader: (1)

Go to my website and in the lower left corner of the page is good info on the coils....
You can ditch the blocks and use 14" x 125 lb/in rated coils
http://cgi.ebay.com/ebaymotors/NEW-R...mZ290014125492

The ride quality should be so much better. Of course, if you do this you'll have to supply us with pics...before and after. A shot of the underside showing the existing blocks would be interesting...

http://www.gearinstalls.com/duckie.htm

http://www.gearinstalls.com/coilphilbert.htm