Transfer Case Mounted Parking Brake Problems
Oct 14, 2008 | 05:59 PM
#1
Thread Starter
Registered User
Joined: Oct 2006
Posts: 4,166
Likes: 11
From: GrangeVille, Idaho
Transfer Case Mounted Parking Brake Problems
I have an 86 4Runner that has been changed from automatic to manual, i bought a transfer case mounted parking brake from all pro offroad and when i went to install the disc on the transfer case out put shaft mounting flange it won`t fit, the brake disc hits the floor about a half inch before it lines up with the mounting flange bolt holes. Im running duel cases and im using a bud built cross member to hold everything up. any ideas how i can make this work ?.
Oct 14, 2008 | 06:29 PM
#4
Registered User
Joined: Oct 2007
Posts: 1,521
Likes: 0
From: Hopkins, MN
Thread
Thread Starter
Forum
Replies
Last Post
RedRunner_87
95.5-2004 Tacomas & 96-2002 4Runners (Build-Up Section)
84
Jun 1, 2021 01:51 PM
skoti89
Offroad Tech
3
Jul 8, 2015 12:05 AM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM
