trailrunner vs. prerunner
#1
Registered User
Thread Starter
Join Date: Mar 2007
Location: Orange County, CA
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
trailrunner vs. prerunner
Don't get me wrong, I love the beefy, locked, 33x12, and a SAS trail rig,
but doesnt anyone love the TC longtravel, fiberglass, tilt lift look that prerunners have?
I want my rig to catch the best of both worlds.
but doesnt anyone love the TC longtravel, fiberglass, tilt lift look that prerunners have?
I want my rig to catch the best of both worlds.
#3
Registered User
#4
Registered User
Thread Starter
Join Date: Mar 2007
Location: Orange County, CA
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Deathrunner
DEATHRUNNER is an example of "best of both worlds."
The flared fenders, and skidplate give an awesome look. But it crawls like a damn spider.
What kind of suspension/arms do you have, DEATHRUNNER?
The flared fenders, and skidplate give an awesome look. But it crawls like a damn spider.
What kind of suspension/arms do you have, DEATHRUNNER?
#6
Registered User
Join Date: Aug 2005
Location: Springs, Colorado
Posts: 1,671
Likes: 0
Received 0 Likes
on
0 Posts
My next truck is gonna be LT Total chaos with a flexy rear end, arb front and rear, single case with 4.7s, 5.29s, 35s, beadlocks, and a 3.4 supa charged
Im shooting for a 95 truck with no rust and a blown 3.0.
Im shooting for a 95 truck with no rust and a blown 3.0.
#7
Registered User
Thread Starter
Join Date: Mar 2007
Location: Orange County, CA
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#8
Registered User
locked front, 35's, and a supercharged 3.4 through double low range reduction...... OUCH!
Drive cautiously.
#9
Registered User
i love the pre runner's (death runner's is bada$$) rock crawling is just waay to slow and boring to me but i live near the rubicon so i do a little of it, but the desert is where my heart is (san diego east county boy)
my set up is budget till i can get the TC kit
my set up is budget till i can get the TC kit
Last edited by norcalsvx; 05-23-2007 at 12:58 PM.
#10
Registered User
Thread Starter
Join Date: Mar 2007
Location: Orange County, CA
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
your truck is sick. I'm looking in to fiberglass if I dont find anything else worth investing in. What size flare do you have? I want the TC kit soo bad, but its hella expensive.
The duals on your rig look awesome for whoops. What kind of arms and suspen are you running?
#12
Registered User
Thread Starter
Join Date: Mar 2007
Location: Orange County, CA
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
I have fabtech upper arms, edelbrocks, and swayaway 25mm tbars.
I want to get a new suspen kit and arms so i could jump without breaking something.
Im scared of busting an arm or something. Why can't i find Fabtech lower a-arms for my truck?
I also want to test my down travel, along with my flex. Havent done it yet.
Flex should suck with my 25mm's
I want to get a new suspen kit and arms so i could jump without breaking something.
Im scared of busting an arm or something. Why can't i find Fabtech lower a-arms for my truck?
I also want to test my down travel, along with my flex. Havent done it yet.
Flex should suck with my 25mm's
Last edited by 2WDoffroadx; 05-23-2007 at 01:27 PM.
#13
Registered User
your truck is sick. I'm looking in to fiberglass if I dont find anything else worth investing in. What size flare do you have? I want the TC kit soo bad, but its hella expensive.
The duals on your rig look awesome for whoops. What kind of arms and suspen are you running?
The duals on your rig look awesome for whoops. What kind of arms and suspen are you running?
#14
Registered User
#16
Registered User
Join Date: Sep 2006
Location: Sacramento, CA.
Posts: 363
Likes: 0
Received 0 Likes
on
0 Posts
Here is an old pic of my truck from when I first made the LT kit.
I literally built the kit and hacked up the fenders and drove it to Mexico with zero test time and went to the San Felipe 250 a couple years ago, drove a lot of offroad miles in a foreign country. I didn't have any problems but a thrown alternator belt.
Specs:
*Home made upper and lower a arms
*3.25" wider per side
*Strategicly placed low profile droop and bump stops
*Made of .188 wall DOM gusseted with 1/4" and 3/8" plating
*10" stroke 2.5" dual rate King coilovers with remote reservoirs
*TC lower uni-ball conversion
*TC shock hoops
*16" of wheel travel (front diff removed to not be limited by CV's)
Total cost was less than 2K (mostly shocks $1300)
In the last couple years I added the TC idler arm. I gusseted the center link and pitman arm and switched to heim steering and 62" Deavers. I wish my digital camera worked so I could take some current pics as a lot has changed. 280K 22RE.
I literally built the kit and hacked up the fenders and drove it to Mexico with zero test time and went to the San Felipe 250 a couple years ago, drove a lot of offroad miles in a foreign country. I didn't have any problems but a thrown alternator belt.
Specs:
*Home made upper and lower a arms
*3.25" wider per side
*Strategicly placed low profile droop and bump stops
*Made of .188 wall DOM gusseted with 1/4" and 3/8" plating
*10" stroke 2.5" dual rate King coilovers with remote reservoirs
*TC lower uni-ball conversion
*TC shock hoops
*16" of wheel travel (front diff removed to not be limited by CV's)
Total cost was less than 2K (mostly shocks $1300)
In the last couple years I added the TC idler arm. I gusseted the center link and pitman arm and switched to heim steering and 62" Deavers. I wish my digital camera worked so I could take some current pics as a lot has changed. 280K 22RE.
Last edited by Yota82; 05-23-2007 at 07:11 PM.
#18
Registered User
Join Date: Apr 2007
Location: Grass Valley, CA
Posts: 590
Likes: 0
Received 0 Likes
on
0 Posts
Hey norcalsvx i have the 26 downey t-bars and are to still for flex but good for high speed and I want to do both. are the OME bars stiff enough to do like 50 offroad without bottoming out and do they flex alright? thanks for your help. maybe well meet up at greenhorn sometime.
#19
Contributing Member
Join Date: Jul 2003
Location: Simi Valley, Ca
Posts: 498
Likes: 0
Received 0 Likes
on
0 Posts
Here is mine. I'm running the Total Chaos Gen II caddy with most of the upgrades for the front suspension. In the rear I'm running 62" deavers with 18" fox shocks. I'm also locked in the rear and have a limited slip in the front. It has gone everywhere I wanted it to and has never let me down.
#20
Registered User
Thread Starter
Join Date: Mar 2007
Location: Orange County, CA
Posts: 352
Likes: 0
Received 0 Likes
on
0 Posts
Both of those Yota's are sick.
PINNACLE how do you have a limited slip on a IFS? NIIICE rig though, man. The fenders lookawesome. TOUGH little piece of machine.
YOTA82, how the hell did you build the arms yourself? If the angles arent percisely accurate, it'll throw you off. How'd you get the right angles down?
PINNACLE how do you have a limited slip on a IFS? NIIICE rig though, man. The fenders lookawesome. TOUGH little piece of machine.
YOTA82, how the hell did you build the arms yourself? If the angles arent percisely accurate, it'll throw you off. How'd you get the right angles down?