TJ spring lift
Jul 17, 2010 | 04:27 PM
#1
Thread Starter
Registered User
Joined: Mar 2010
Posts: 45
Likes: 0
From: 94561
TJ Wrangler 97-06 spring lift
Hey,
I have looked at all the ZUK mod pages and also the TJ spring lift mods and decided to go TJ. Man, what a difference. I gained 2.5 inches of travel. The ride is perfect. Now, my runner doesn't bottom out when I hit a pot hole. Totally happy!! Took less than an hour and rented a spring compressor from autozone. I cut off about 6.5 in from the end of the coil(linear). Coil is nestled into the bump stop and I can see no way how it could come out. I also used a High lift floor jack from harbor freight.
I have some pix, will post'em in a bit.
Mitch
before
after
I have looked at all the ZUK mod pages and also the TJ spring lift mods and decided to go TJ. Man, what a difference. I gained 2.5 inches of travel. The ride is perfect. Now, my runner doesn't bottom out when I hit a pot hole. Totally happy!! Took less than an hour and rented a spring compressor from autozone. I cut off about 6.5 in from the end of the coil(linear). Coil is nestled into the bump stop and I can see no way how it could come out. I also used a High lift floor jack from harbor freight.
I have some pix, will post'em in a bit.
Mitch
before
after
Last edited by sportbiker929; Jul 23, 2010 at 05:56 AM.
The fatter the tire, the closer the rubber gets to the rear TJ coils...but it looks like you have enough clearance there. ZUK
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Flying91
86-95 Trucks & 4Runners (Build-Up Section)
45
Apr 11, 2024 04:39 PM
Jcrawl94
84-85 Trucks & 4Runners (Build-Up Section)
10
Oct 24, 2015 04:34 PM
coffey50
Offroad Tech
17
Jul 28, 2015 10:55 AM
