Rolled my Yota
#1
Registered User
Thread Starter
Join Date: Nov 2012
Location: Southeast side of Houston, Tx
Posts: 62
Received 0 Likes
on
0 Posts
Rolled my Yota
http://s1303.photobucket.com/user/Skybluyota/media/20130721_160647_zpse767b967.jpg.html?sort=3&o=0
So I Rolled my Yota. it was about 2 months ago. Ive been so bummed i havent even been on Yotatech since. Got the truck running, trying to get a windshield in it. If not, does anybody want to buy it as is? Mechanically its tip top. From the windows up, the roof is pushed over about three inches. Check my signiture for whats up. SO DEPRESSED!!!
So I Rolled my Yota. it was about 2 months ago. Ive been so bummed i havent even been on Yotatech since. Got the truck running, trying to get a windshield in it. If not, does anybody want to buy it as is? Mechanically its tip top. From the windows up, the roof is pushed over about three inches. Check my signiture for whats up. SO DEPRESSED!!!
#2
Registered User
Thread Starter
Join Date: Nov 2012
Location: Southeast side of Houston, Tx
Posts: 62
Received 0 Likes
on
0 Posts
#3
Registered User
Thread Starter
Join Date: Nov 2012
Location: Southeast side of Houston, Tx
Posts: 62
Received 0 Likes
on
0 Posts
#6
Registered User
Thread Starter
Join Date: Nov 2012
Location: Southeast side of Houston, Tx
Posts: 62
Received 0 Likes
on
0 Posts
Yeah, Ive had the truck for 7yrs. Money-wise its not, I just have a lot of blood sweat and tears in it. Its gonna be hard to let it go. I really dont have the time or place to part it out. It is north of Auburn, CA right now. I would like to sell it as-is to someone. I know about the rules as far as selling things on the forum. Just to be clear, Im purely seeking advice at this point. If the time comes to actually do it, I will properly post an ad in the classified section. With the info on my sig, what would be a good price tag?
#7
Registered User
Thread Starter
Join Date: Nov 2012
Location: Southeast side of Houston, Tx
Posts: 62
Received 0 Likes
on
0 Posts
http://i1303.photobucket.com/albums/...ps831cd5ce.jpg
http://i1303.photobucket.com/albums/...psaeefe8a3.jpg
http://i1303.photobucket.com/albums/...ps09694863.jpg
http://i1303.photobucket.com/albums/...ps498db3d5.jpg
http://i1303.photobucket.com/albums/...psc9efad83.jpg
So I think the order is a little scrambled, but these are some recovery pics
http://i1303.photobucket.com/albums/...psaeefe8a3.jpg
http://i1303.photobucket.com/albums/...ps09694863.jpg
http://i1303.photobucket.com/albums/...ps498db3d5.jpg
http://i1303.photobucket.com/albums/...psc9efad83.jpg
So I think the order is a little scrambled, but these are some recovery pics
Trending Topics
#8
Registered User
Thread Starter
Join Date: Nov 2012
Location: Southeast side of Houston, Tx
Posts: 62
Received 0 Likes
on
0 Posts
http://i1303.photobucket.com/albums/...psbb879c76.jpg
This is the view from the bottom after the recovery, the first one on previous post is from the top where i went off.
This is the view from the bottom after the recovery, the first one on previous post is from the top where i went off.
#9
rolling over is one of my biggest fears :-( really sorry to see yours go over like that.
try posting it on pirate as well, and the local craigs list... there are a lot of these trucks in nor cal.
price-wise... if it's an automatic, ask $1.5k?? tough call... i would at least pull the audio out and sell that seperately.
try posting it on pirate as well, and the local craigs list... there are a lot of these trucks in nor cal.
price-wise... if it's an automatic, ask $1.5k?? tough call... i would at least pull the audio out and sell that seperately.
#10
Registered User
Thread Starter
Join Date: Nov 2012
Location: Southeast side of Houston, Tx
Posts: 62
Received 0 Likes
on
0 Posts
I feel like i could ask that for the motor. Its a fresh motor and trans. yeah, you didnt read my signature. Its a 5spd. If thats all ill get, im gonna tow it back to Texas and part it out. Its worth way more to me than that.
#12
Registered User
Thread Starter
Join Date: Nov 2012
Location: Southeast side of Houston, Tx
Posts: 62
Received 0 Likes
on
0 Posts
I know one thing, if I fix it, Im leaving the fender and door on it. They look awesome! Might have issues with my tire sticking out past the flattened fender though.
#13
Registered User
Join Date: Nov 2012
Location: santa cruz, ca
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Oh man I feel your pain.
My wife did a little ghost riding action in my runner a couple months back luckily its pretty flat in front of my house. Just dented the bumper a little and destroyed my neighbor's trash cans.
Don't sell it man you never get even half your money back. time to turn it into a
wheeler.
My wife did a little ghost riding action in my runner a couple months back luckily its pretty flat in front of my house. Just dented the bumper a little and destroyed my neighbor's trash cans.
Don't sell it man you never get even half your money back. time to turn it into a
wheeler.
#15
Registered User
iTrader: (1)
this^ or chop it like i mentioned. you'll never get back your $ if selling it whole (even if it wasn't rolled) - that's just the nature of the hobby. on the plus side though, you didn't just sink a bunch of money into it for SAS, etc then roll it on the first trip out like many people do.
where in Auburn did you roll this thing? looks scary from the pics.
where in Auburn did you roll this thing? looks scary from the pics.
Thread
Thread Starter
Forum
Replies
Last Post
LittleUgly
86-95 Trucks & 4Runners (Build-Up Section)
15
01-02-2020 01:30 PM
primordialbeast117
86-95 Trucks & 4Runners
11
12-19-2015 12:23 PM
83yotastockR
86-95 Trucks & 4Runners (Build-Up Section)
11
11-10-2015 06:54 AM
PNW94Runner
86-95 Trucks & 4Runners
3
09-29-2015 02:55 PM