Nice! what break in process did you use?

 

Nothing too special. Just keeping it nice and easy. No extended highway trips. Going to do these until first 500 miles and then pretty much forget about it.

Any other ideas, feel free to chime in.

 

306,620 (500 miles after complete rebuild)

Changed oil and filter.
Got up to operating temp.
Adjusted idle.
Jumped timing pigtail and adjusted timing to 5 degrees advance mark.

Pulled valve cover and re-adjusted valves. Only 3 needed adjustment.

Checked torque on head bolts. None moved.

Put it all back together and think I'm finally finished. I'll be keeping a close eye on the dipstick for a while. So far everything seems fine.