Pulling Out a 3VZE: A Couple Questions
Jun 15, 2014 | 06:17 PM
#1
Thread Starter
Registered User
Joined: Apr 2006
Posts: 509
Likes: 9
From: S.E. Wisconsin
Pulling Out a 3VZE: A Couple Questions
Outa my '93 4x4 p/u. I'm thinking to pull it out without the transmission and transfer case. Right now I'm at a point where all I've got left to do is undo hoses and wires, and separate the transmission and the engine.
On my 22R vehicles I used to unbolt the transmission crossmember to tilt the engine back for easy access to the bell housing bolts. Is this the way to go with the 3vze? It has a 5 spd.
Should I unplug the wiring harness from the ECU and take it out with the engine? Or take it off the engine first?
On my 22R vehicles I used to unbolt the transmission crossmember to tilt the engine back for easy access to the bell housing bolts. Is this the way to go with the 3vze? It has a 5 spd.
Should I unplug the wiring harness from the ECU and take it out with the engine? Or take it off the engine first?
Thread
Thread Starter
Forum
Replies
Last Post
rushw
General Electrical & Lighting Related Topics
4
Jul 18, 2015 01:46 PM
Jnkml
95.5-2004 Tacomas & 96-2002 4Runners
3
Jul 6, 2015 01:20 PM
