Does anyone know if these Procomp AAL's will work with stock U-bolts???

http://www.summitracing.com/parts/EXP-13120/

 

youll most likely break them, i have those same AALs and i broke 2/4 of my u-bolts, picked up a 1" lift block kit from pep boys that came with new ubolts and all done- $30 for the blocks n bolts

 

i have had a 2in superlift AAL on my yota with stock ubolts and have about 1/4-1/2 of threads left. been on there about 2ish years. i aint never broke em. check out topguncustomz.com fro AALs also

 

mine broke when i removed them

 

Thanks for the input guys. How much rougher was the ride with the ALL's?

 

When I had AAL's on I put new Ubolts on. My stock ones were too short.

Didn't notice much ride difference...but the flex sucked.

 

Ditto here, my u-bolts were too short also, hadda buy new ones.

 

the threads on mine stripped out.
im not sure why everyone hacks on AAL's. i got a $50 rough country one off ebay and the ride and flex are pretty suhweeeett.
of course my rear shocks did come from a lifted CJ5 lol