Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

Post Your Pics!!!

Thread Tools
 
Search this Thread
 
Old Jan 27, 2010 | 09:15 PM
  #2501  
norcalyota's Avatar
Registered User
 
Joined: Nov 2006
Posts: 99
Likes: 0
From: San Luis Obispo, California
I saw this beast of a rig and then looked at your handle and started to get really excited...norcalyota...but then I saw that it was for Northern California, NOT North Carolina. Oh Well. It's still HOTTT.
ya i agree it is. for sure the most capable rig we had on that trip.
here's a few more
Name:  Picture082.jpg
Views: 152
Size:  105.2 KB
Name:  Picture076.jpg
Views: 152
Size:  138.2 KB
Name:  Picture052.jpg
Views: 142
Size:  127.8 KB
Reply
Old Jan 27, 2010 | 11:47 PM
  #2502  
calipatient's Avatar
Registered User
iTrader: (1)
 
Joined: Oct 2009
Posts: 252
Likes: 0
From: Fresno, CA
i would love mine too if the tranny werent burnt... swapped a new one in that i bought from a member here (ill wait to say who)... appears i got burnt just like my tranny. gears are slipping. i have a tranny tech coming by tomorrow to double check... doesnt look good!
Reply
Old Jan 28, 2010 | 03:05 PM
  #2503  
rattlewagon's Avatar
Registered User
15 Year Member
Liked
 
Joined: Oct 2009
Posts: 4,832
Likes: 332
From: Northfield, Vermont
this thread is over 100 pages. sick.
Reply
Old Jan 28, 2010 | 03:38 PM
  #2504  
StangBanger's Avatar
Registered User
 
Joined: Feb 2009
Posts: 498
Likes: 0
From: Miami, Florida
and yet..not long enough...
Reply
Old Jan 28, 2010 | 04:54 PM
  #2505  
EACRUISER's Avatar
Registered User
 
Joined: May 2009
Posts: 5
Likes: 0
Hello from down under,
Been on here as a reader for a long time & just looked through all these pages at all these sweet rigs and realised i hadn't posted any of mine up yet.

Well here is my 94 Hilux Surf "4runner" 3.0Lt Turbo Diesel.

In all its lifted with 35's glory.
Built the rear bar/wheel carrier myself as well and did all of the suspension and bodylift in my driveway at home.

Name:  DSCF6654.jpg
Views: 186
Size:  114.8 KB

Name:  DSCF6638.jpg
Views: 159
Size:  126.5 KB
This one was taken by a friend so people could laugh at my camp setup.

Last edited by EACRUISER; Jan 28, 2010 at 04:59 PM.
Reply
Old Jan 28, 2010 | 05:01 PM
  #2506  
toyota4x4907's Avatar
Registered User
 
Joined: Sep 2008
Posts: 4,355
Likes: 2
From: middle of no where Alaska
Whoa. That is a sweet rig. Any more pics of the rear bumper?
Reply
Old Jan 28, 2010 | 05:08 PM
  #2507  
Justinvd's Avatar
Registered User
 
Joined: Oct 2007
Posts: 832
Likes: 0
From: B.C
Originally Posted by YoterUp
Gona be able to keep that tcase off the rocks?
Reply
Old Jan 28, 2010 | 05:14 PM
  #2508  
EACRUISER's Avatar
Registered User
 
Joined: May 2009
Posts: 5
Likes: 0
Originally Posted by toyota4x4907
Whoa. That is a sweet rig. Any more pics of the rear bumper?

Just these - if you can make sense out of them

During mock up - 3,000kg blank trailer hub and spindle mocked up before welding. 3mm Thick Steel.

Extended the chassis rails and down brackets to re-inforced recovery points. and welded in another cross bar across the chassis at the back of the factory chassis rail.
Name:  DSCF6530.jpg
Views: 158
Size:  48.7 KB

Last edited by EACRUISER; Jan 31, 2010 at 07:23 PM.
Reply
Old Jan 28, 2010 | 06:30 PM
  #2509  
jsn_stockard's Avatar
Registered User
 
Joined: Feb 2008
Posts: 743
Likes: 0
From: Gainesville Texas
Nice job, and welcome to YT
Reply
Old Jan 28, 2010 | 06:34 PM
  #2510  
toyota4x4907's Avatar
Registered User
 
Joined: Sep 2008
Posts: 4,355
Likes: 2
From: middle of no where Alaska
Niice. Im going to be using yours for reference when I make mine
Reply
Old Jan 28, 2010 | 06:56 PM
  #2511  
kinzer's Avatar
Registered User
 
Joined: Feb 2008
Posts: 279
Likes: 0
From: Coeur d Alene, id
heres some recent pics

Name:  0122000725.jpg
Views: 155
Size:  78.9 KB
Name:  0122000750.jpg
Views: 166
Size:  72.1 KB
Name:  DSCN1018.jpg
Views: 146
Size:  242.0 KB
Name:  DSCN1020.jpg
Views: 160
Size:  224.7 KB
Name:  DSCN1033.jpg
Views: 164
Size:  105.5 KB
Reply
Old Jan 28, 2010 | 06:57 PM
  #2512  
EACRUISER's Avatar
Registered User
 
Joined: May 2009
Posts: 5
Likes: 0
Thanks guys.

I must admit that there are some really sweet looking rigs on this site. If only Transport Regulations here in Australia were not so strict.

Otherwise i would be following in alot of the footsteps of the users on this site.

My Rig is borderline but passable for registration inspection.

(Its My Daily Driver)
Reply
Old Jan 28, 2010 | 07:35 PM
  #2513  
flashkl's Avatar
Registered User
 
Joined: Oct 2008
Posts: 1,584
Likes: 0
From: Burlington, VT
kinzer:
your rig, it used to be so fricken clean... but it adds tons of characater. Lov eit!
Reply
Old Jan 28, 2010 | 08:06 PM
  #2514  
peow130's Avatar
Registered User
 
Joined: Sep 2008
Posts: 3,887
Likes: 16
From: Spokane, WA
Name:  muddin-1.jpg
Views: 158
Size:  41.4 KB
about 5 hours ago when i got stuck O_o
my friends ranger couldnt get me out.
then my friends 1/2ton chebby couldnt do it
had to call in my dad and bring the full size 95' dodge and a chain, lol.
Reply
Old Jan 28, 2010 | 08:21 PM
  #2515  
Lumpy's Avatar
Registered User
 
Joined: Jan 2009
Posts: 6,086
Likes: 17
From: Just North of Pittsburgh
That's what we call an oops
Reply
Old Jan 28, 2010 | 08:34 PM
  #2516  
peow130's Avatar
Registered User
 
Joined: Sep 2008
Posts: 3,887
Likes: 16
From: Spokane, WA
lol.
I've made it through that mud-hole upwards of 5 times.
If i was locked in the rear i could have kept going, too.

Also, my friends fullsize 77 chevy couldnt make it through...
Reply
Old Jan 29, 2010 | 05:39 PM
  #2517  
rattlewagon's Avatar
Registered User
15 Year Member
Liked
 
Joined: Oct 2009
Posts: 4,832
Likes: 332
From: Northfield, Vermont
nice looking long bed. keep that thing clean. those are a very rare find in my neck of the woods.
Reply
Old Jan 29, 2010 | 08:43 PM
  #2518  
kinzer's Avatar
Registered User
 
Joined: Feb 2008
Posts: 279
Likes: 0
From: Coeur d Alene, id
Originally Posted by flashkl
kinzer:
your rig, it used to be so fricken clean... but it adds tons of characater. Lov eit!

thanks man. i know, it makes me cringe every time i look at the pics of when i first bought it.
Reply
Old Jan 30, 2010 | 02:03 PM
  #2519  
m1ashooter's Avatar
Registered User
 
Joined: Jul 2008
Posts: 52
Likes: 0
From: North Texas
Ok here's my latest after I added the Pro-Comp AAL, SuperLift shocks, and removed those awesome looking dealer installed running boards. These two pictures are from the "Stock Crawling Collection".




Whoops. Make that Skyjacker goodies not Superlift.
Reply
Old Jan 30, 2010 | 02:23 PM
  #2520  
RoadBloK's Avatar
Registered User
 
Joined: Dec 2009
Posts: 16
Likes: 0
From: Central NC
Reply



All times are GMT -8. The time now is 05:57 PM.