ok id like to see all sorts of rigs, with black rims...post your pics and label what type of rims you have.

 

33" BFG/MT with american racing rims that I picked up for 20 each, painted with por15, and top coated with spraypaint. I did this like 3 months ago and have no chips or blemishes!
















If your gonna paint them, it's all in the prep.

 

Looks good. Kind of resembles the teflon coated wheels in the pictures.

 

chris's wheels are hot.

 

 

Chris... those are the sexiest wheels ive seen on this webpage todate...... you HAVE to spill your process for painting as well as type of paint..>DAM!!!!

 

chris...where did you get the rims from....

 

What size rims are those? 15 by what and what kinda back spacing.. Do you have any trouble with rubbing.

 

search, he explained everything in a thread a couple months ago.

 

stock steelies + couple cans of black spray paint =


stock alloys + couple cans of black spray paint =

 

Those stock aluminum rims actually look pretty good!

Here's mine, I opened a photobucket.com acct. just so I could upload a pic



The tires are BFG AT KO 33x10.50's mounted on Pro Comp Xtreme series 97 steelies. They're 15x8 with 3.75" of backspacing. I chose these because they have round cutouts which look better, at least on my vehicle IMO

 

I used to run black steel wheels...

 

33X10.50 BFG AT tires on 4" backspaced wheels and NO lift... (old pic)



When i first bought it: 235's...

 

so is the overall opinion that stock backspacing is the best bet???

 

Bastard Amercians and rust free yota...This happened to mine 2 weeks ago.. Rust was so bad on that bumper it had to be ripped off by HAND...

 

Yah that happened on my drivers side - I welded up the bumper but I need to replace it still so I can put my mudflaps back on. My revers side wheel well looks like that or worse. I am going to get inserts for mine.

 

any of you guys know of anyone selling black steel rims in Calgary?

 

You can usually find a 4x4 store and pick up a set of Black Rock Crawlers. I just picked up a set for a friend.. I'll post some pics once it stops raining. (just put them on this weekend).. probably cost you about $250-300 for the set

 

NO! Get at least 4" or 3.75"

 

there are some in the bargain finder, I believe the chevy ones have the same bolt pattern. There doesn't seem to be many good deals right now but I don't know how much new ones cost