oil dipstick question problem?
#1
Registered User
Thread Starter
Join Date: Feb 2006
Location: Hot a$$ PHX
Posts: 1,753
Likes: 0
Received 0 Likes
on
0 Posts
oil dipstick question problem?
alright here is the deal. When I turn off my engine I hear a hissing sound. After using my super detective skills I have located the cause of the hiss. It comes from my dipstick. it sounds like suction, when I remove the dipstick it gets loud then goes away and nothing is blowing out.
So whats the deal? should I get a new dipstick and be done with it or is that just hiding a real problem? is there supposed to be suction there? the dipstick is old and the seal is beat.
So whats the deal? should I get a new dipstick and be done with it or is that just hiding a real problem? is there supposed to be suction there? the dipstick is old and the seal is beat.
#2
Contributing Member
I'd start by placing your PCV valve
PCV = Positive Crankcase Ventilation
You've obviously got some sort of air pressure differential occurring in the crank case, and I'm willing to be it's because the PCV valve is clogged up and not letting the pressure release
PCV = Positive Crankcase Ventilation
You've obviously got some sort of air pressure differential occurring in the crank case, and I'm willing to be it's because the PCV valve is clogged up and not letting the pressure release
Last edited by iamsuperbleeder; 07-30-2010 at 06:08 PM.
Thread
Thread Starter
Forum
Replies
Last Post
TURBOrunnerNM
86-95 Trucks & 4Runners
4
07-22-2015 11:01 AM
Avenged
95.5-2004 Tacomas & 96-2002 4Runners
4
07-09-2015 07:55 AM