Not sure exactly what it is, but something doesnt look right
#22
Registered User
IF it was aligned....sure. But, how many times have you seen old, failing IFS steering components with a good alignment? Consider, if a vehicle was aligned recently enough, it would stand to reason the person doing it would notice a bad ilder arm....or tie rods...or pitman, blah, blah. If that failure is from age, it's been bad for a good while. Probably not aligned in a long time, either. Notice the long standing rust!
I very well could be totally wrong, but it simply doesn't hurt to check these things. You know....inspection sort of thing?
I very well could be totally wrong, but it simply doesn't hurt to check these things. You know....inspection sort of thing?
Last edited by thook; 06-17-2008 at 02:45 PM.
#23
Registered User
Join Date: May 2008
Location: Hills of Vermont
Posts: 124
Likes: 0
Received 0 Likes
on
0 Posts
Agree with thook, i did my idler arm and said f#$ it on the alignment, ate through two front 31X10.50 in no time, she was toed in BAD. Get it aligned to save being mad at yourself
#24
Contributing Member
Alignments are cheaper than rubber. If you can't afford to have an alignment done, do it yourself:
https://www.yotatech.com/forums/f116...t-pics-115273/
https://www.yotatech.com/forums/f116...t-pics-115273/