I have a 95' Toyota Pickup, 2wd, standard cab that recently had a tree fall on the bed. The suspension and frame are fine, but unfortunately the bed is crushed. I already pulled it off, and am looking for a new one, but all I seem to be able to find are late 80's model beds. Does anyone know if an 89' bed will fit on my 95'?

 

it should. there may be some subtle differences in the lines though.
when in doubt, measure.

and it would also depend on if your 95 is a tacoma or not- frames are different between a 'normal' 95 and the tacoma.

 

I would say yes also, the models were 89-95.
But I would also say measure to make sure the mounting holes line up correctly.

 

You must be the guy I saw on America's Funniest Videos.

 

The cabs and boxes for the 89-95 pickups are all interchangeable. They are all the same.

They changed in 89 from the 2nd gen style then changed in 1995.5 for the tacoma..

 

I have a '95 bed 7' that I'll sell to you if you still need one. I'm in Kentucky. It has no rust. Bought it for my '94 and was told it was a shortbed. It is not.
$500.

 

I thought that 2 and 4X4 where different. The fenders on a 4X4 stick out more.