Notices
86-95 Trucks & 4Runners 2nd/3rd gen pickups, and 1st/2nd gen 4Runners with IFS

need to know where to get a lot of parts and such

Thread Tools
 
Search this Thread
 
Old Nov 9, 2008 | 01:37 PM
  #1  
99SR5's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Oct 2005
Posts: 888
Likes: 0
From: leesburg, VA
need to know where to get a lot of parts and such

ok well i just picked up a 87 4Runner, which has the usual 1st gen problems.

1) fuel gauge barely works, it stays at full for a bit then goes to empty but it has fuel in it lol.

2) has a leak in the exhaust manifold so i want a new header

3) both front fenders and passenger side back fender

4) shifter boot

5) and interior pieces
Reply
Old Nov 9, 2008 | 02:39 PM
  #2  
Matt16's Avatar
Registered User
 
Joined: Oct 2007
Posts: 5,377
Likes: 5
1,3,4,5- junkyard.
2- Engnbldr, Downey... search "22RE header" or "3VZE headers"
Reply
Old Nov 9, 2008 | 02:45 PM
  #3  
99SR5's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Oct 2005
Posts: 888
Likes: 0
From: leesburg, VA
Originally Posted by Matt16
1,3,4,5- junkyard.
2- Engnbldr, Downey... search "22RE header" or "3VZE headers"
dang just junk yard? i was hoping there was a company that remakes interior pieces.
Reply
Old Nov 9, 2008 | 02:58 PM
  #4  
904_runner's Avatar
Registered User
 
Joined: Mar 2008
Posts: 3,870
Likes: 4
From: Chico, California
Idk about that.

i would check junkyards and watch craigslist and other classifieds like a hawk
Reply
Old Nov 9, 2008 | 03:44 PM
  #5  
'88 4-RUNNER's Avatar
Registered User
 
Joined: Jul 2008
Posts: 45
Likes: 0
From: PEI, CANADA
1,3,4,5 Just post it here,, chances are the lads will have it. I could get my hands on the parts you need tomorrow,, but,, post your interior color wants, etc.
Another way is to search locally. Half the fun is in scoring what you need from an old beater,, most of the time for a couple a bucks And "new" interior will likely run you as much as the truck.
Reply
Old Nov 9, 2008 | 04:35 PM
  #6  
4banginRunner's Avatar
Registered User
 
Joined: Dec 2005
Posts: 2,024
Likes: 6
From: Souderton, PA
Originally Posted by 99SR5
ok well i just picked up a 87 4Runner, which has the usual 1st gen problems.

1) fuel gauge barely works, it stays at full for a bit then goes to empty but it has fuel in it lol.

2) has a leak in the exhaust manifold so i want a new header

3) both front fenders and passenger side back fender

4) shifter boot

5) and interior pieces

1) its more than likely the sending unit...parts store, dont mess with junkyard parts here

2) I'd go thorley...stay away from pacesetter

3) fenders can be had new online for anywhere from $60-$130 i've seen, or you could wait it out like i did and find a decent set in the junkyard

4) boots...ebay, parts store?, junkyard

5) Junkyard, gray interiors are plentiful...brown is hard to find, red and blue harder
Reply
Old Nov 9, 2008 | 05:04 PM
  #7  
myyota's Avatar
Registered User
 
Joined: Oct 2006
Posts: 4,166
Likes: 11
From: GrangeVille, Idaho
Originally Posted by 99SR5
dang just junk yard? i was hoping there was a company that remakes interior pieces.
No such luck on that one, if you have a pic n pull near you that would be a good place to start. I have found many things ive needed to put my 86 4Runner back together and a few things it didn`t come with that i added. I go to a couple of diferent pic n pulls almost every weekend in a search for thing i need for my 4Runner, the search never ends.
Reply
Old Nov 9, 2008 | 05:11 PM
  #8  
abecedarian's Avatar
Registered User
 
Joined: Mar 2008
Posts: 12,723
Likes: 6
From: Temecula Valley, CA
Originally Posted by 99SR5
dang just junk yard? i was hoping there was a company that remakes interior pieces.
well... there is another place...
... dealer ....
good luck getting decent prices and sufficient stock on hand there, though ...
Reply
Old Nov 9, 2008 | 10:25 PM
  #9  
Matt16's Avatar
Registered User
 
Joined: Oct 2007
Posts: 5,377
Likes: 5
Originally Posted by abecedarian
well... there is another place...
... dealer ....
good luck getting decent prices and sufficient stock on hand there, though ...
Can the dealer get interior trim pieces?

Toyota cloth interiors seem to withstand the test of time pretty well (vinyl... not so much), I'm sure you'll find something at a junkyard.
Reply
Old Nov 11, 2008 | 02:43 PM
  #10  
99SR5's Avatar
Thread Starter
Registered User
iTrader: (1)
 
Joined: Oct 2005
Posts: 888
Likes: 0
From: leesburg, VA
well thats a lot of good info thanks a lot guys and i guess keep it coming
Reply
Old Nov 11, 2008 | 03:05 PM
  #11  
a4runnerfreak's Avatar
Registered User
 
Joined: Jul 2008
Posts: 4,592
Likes: 0
From: Grew up in S.C.V, So Cal.....now in Hampstead, NC
PM DeathCougar. He works at a Toyota/Lexus yard here in Wa state.
Reply
Old Nov 13, 2008 | 05:11 PM
  #12  
89needsatranny's Avatar
Registered User
15 Year Member
 
Joined: Aug 2008
Posts: 260
Likes: 0
From: West Georgia
yeah my driver side vinyl door cover is shredded to pieces and i have been looking for new ones forever and no luck... its really hard to find yota parts here in the city. any websites??
Reply
Old Nov 13, 2008 | 05:20 PM
  #13  
abecedarian's Avatar
Registered User
 
Joined: Mar 2008
Posts: 12,723
Likes: 6
From: Temecula Valley, CA
yep, PM DeathCougar, or visit: http://nix99.com/
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Charecter1
86-95 Trucks & 4Runners
10
Nov 6, 2023 10:08 AM
Colington
86-95 Trucks & 4Runners
20
Mar 8, 2020 09:51 AM
andrewtexas123
86-95 Trucks & 4Runners
3
Jul 14, 2015 04:29 AM
cyclist231
95.5-2004 Tacomas & 96-2002 4Runners
2
Jul 7, 2015 12:56 PM
Nickdigg
86-95 Trucks & 4Runners
1
Jul 7, 2015 06:04 AM




All times are GMT -8. The time now is 04:09 PM.