Might have stumbled upon another deal??? advice?
#1
Registered User
Thread Starter
Might have stumbled upon another deal??? advice?
might have stumbled upon some goods...?
suposedly 3in rancho upper arms and thicker tbars... what do you guys have to say about these??
and a procomp 4in bracket lift...
should i do it? ohh, and hes throwing in the warn hubs..
thanks!
suposedly 3in rancho upper arms and thicker tbars... what do you guys have to say about these??
and a procomp 4in bracket lift...
should i do it? ohh, and hes throwing in the warn hubs..
thanks!
#2
Contributing Member
Whooo. The parts sound good, but holy cow, the condition doesn't look good. Dang.
Good luck with that.
As for the goods, most looks good, the thicker tbars will seriously stiffen up your ride, and make it pretty crappy. Unless you are running a heavy steel front bumper and a 12k winch, I'd just leave your stock ones in there, much better ride.
Good luck with that.
As for the goods, most looks good, the thicker tbars will seriously stiffen up your ride, and make it pretty crappy. Unless you are running a heavy steel front bumper and a 12k winch, I'd just leave your stock ones in there, much better ride.
#3
Registered User
Thread Starter
thanks for the reply..
any bad words about them upper arms?? the upper arms arnet going to provide any lift without the fat tbars are they??
i should definately be able to clean all that stuff up nicely.
hes also got a set of 5.29 gears that i could get for a good price if anyone wants them... im looking to run 33, wayy later when i recoop some money and find a good deal on some.. so i would want 4.88s.. oh well.
ttyl
any bad words about them upper arms?? the upper arms arnet going to provide any lift without the fat tbars are they??
i should definately be able to clean all that stuff up nicely.
hes also got a set of 5.29 gears that i could get for a good price if anyone wants them... im looking to run 33, wayy later when i recoop some money and find a good deal on some.. so i would want 4.88s.. oh well.
ttyl
#6
gotta start some where. those guys don't know what their talking about. condition? it's steel, as long as nothing is rusted more than surface rust your good. go buy some new bushings and ball joints.. i've made some nice stuff out of junk thats looked alot worse!
#7
Contributing Member
OP, the upper arms aren't going to give you lift, but neither will the larger t-bars. You have to crank the tbars up to get lift, and you can do that with the stock ones. The fatter the torsion bar, the worse the ride. You would be just fine with the stock ones.
Trending Topics
#8
Registered User
Thread Starter
so just shoot for the 4in bracket lift??
yes all parts are in good shape... surface rust...
ill prolly sand blast them and throw a couple coats of nice spray paint on them...
i dont want to sound like an ass when i say this orangepeel, but axleike is really knowledgeable about these trucks..
thanks!
yes all parts are in good shape... surface rust...
ill prolly sand blast them and throw a couple coats of nice spray paint on them...
i dont want to sound like an ass when i say this orangepeel, but axleike is really knowledgeable about these trucks..
thanks!
#9
Contributing Member
MikeMokas.
If the parts are being sold as a group, buy the whole lot, sand blast the t-bars, paint them, and resell. You could probably get 100 bucks or so for them. Someone with a heavy front bumper will be very happy with them.
If the parts are being sold as a group, buy the whole lot, sand blast the t-bars, paint them, and resell. You could probably get 100 bucks or so for them. Someone with a heavy front bumper will be very happy with them.
Thread
Thread Starter
Forum
Replies
Last Post
crammit442
95.5-2004 Tacomas & 96-2002 4Runners
7
11-29-2017 12:30 PM
matrad
99+ Tundra, 00+ Sequoia, 98+ Land Cruiser/LX470
2
08-08-2015 03:00 PM