locking hubs, lost a piece!!
#1
Registered User
Thread Starter
Join Date: Mar 2007
Location: Phoenix, Arizona
Posts: 680
Likes: 0
Received 0 Likes
on
0 Posts
locking hubs, lost a piece!!
well i was rebuilding my hubs and i lost the little ball in the gravel..its forever gone.3 magnets combing the area, and i cant find it.
what could i use as a substitue? bbs are to big. toyota dealer said they cant order that piece, id have to pay for the hole assembly...even though i just picked up new gaskets/orings from them...
#4
Registered User
Couldn't you take your other hub apart and take the bearing to a parts store or a hardware store and find one thats the same size. I don't think it would matter if it wasn't made by toyota.
#6
Registered User
Join Date: Apr 2007
Location: Cascade Mountains, SW-WA
Posts: 252
Likes: 0
Received 0 Likes
on
0 Posts
i did the same thing.
went to napa, had them get me a few drawers of bearings. looked at the unsheiled type( where you can see the balls on one side)
after i looked at the second one, i bought it for a few bucks.
after dismantling the bearing, it worked.
that was years ago, if i had the extra bearings, id send ya one, and if i had the part number id give you that too
went to napa, had them get me a few drawers of bearings. looked at the unsheiled type( where you can see the balls on one side)
after i looked at the second one, i bought it for a few bucks.
after dismantling the bearing, it worked.
that was years ago, if i had the extra bearings, id send ya one, and if i had the part number id give you that too
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
FS[GreatLakes]: Wanted: 4.88 front diff, rear 8'' 4.88
jaretstuff
Axles - Suspensions - Tires - Wheels
1
08-04-2015 02:08 PM
defrag4
Vehicles - Trailers (Complete)
0
07-31-2015 10:50 AM
Steven.m.paulk
86-95 Trucks & 4Runners (Build-Up Section)
3
07-24-2015 01:44 PM