Knocksensor Problem
10-02-2006, 02:16 PM
#1
Registered User
Thread Starter
Join Date: Sep 2006
Location: OHIO
Posts: 112
Likes: 0
Received 0 Likes
on
0 Posts
Knocksensor Problem
Can anyone help me I have a 88 toyota pick-up and it is throwing a code 52.
I recently swaped a motor from a 86 4 runner into it so I thought I would swap the one of of that or so I though. The sensor that I swaped aparently is
for the oil pressure gauge it was on the passengerside of the block under the oil filter. So with that being said were is the knock sensor and what does it look like?
Also when I swaped the engine I also swaped the cluster because it had a tach and actual gauges instead of idiot light but the temp does not read
acurate any ideas?
I recently swaped a motor from a 86 4 runner into it so I thought I would swap the one of of that or so I though. The sensor that I swaped aparently is
for the oil pressure gauge it was on the passengerside of the block under the oil filter. So with that being said were is the knock sensor and what does it look like?
Also when I swaped the engine I also swaped the cluster because it had a tach and actual gauges instead of idiot light but the temp does not read
acurate any ideas?
Thread
Thread Starter
Forum
Replies
Last Post
theking11863
Vehicle Audio & Home Entertainment
2
03-19-2016 09:36 PM
