junkyard finds
#22
I scored on a full set of seats, door panels, rear cargo panels + doors for $75
The door panels were out of an 89 that was cherry, and the seats were out of an 86. The driver seat is fully adjustable, and to tell you the truth more comfortable than my 02 Tacoma's seats.
The door panels were out of an 89 that was cherry, and the seats were out of an 86. The driver seat is fully adjustable, and to tell you the truth more comfortable than my 02 Tacoma's seats.
#24
ohhh in my head i pictured you at a junkyard holding a rusty bucket sayin "whew dang,just did gots new anteeh freeze, cant wait to get home and change that dang tootin frreze for them squilers get in there ill tell ya sarn what there dang git er dun"
#28
The junkyards here are always pricey. I bought an ECM the other day for $125 and they wanted 65 per wheel dollars for some stock wheels that didnt have caps and were pitted a little,didnt buy them. Grabbed a couple injector wireing clips or whetever they are called that plugs into the injector for like 20 bucks when i did my head gaskets.
#29
Thanks Teuf!
You lucky dog! So I go on a quest to get a pair of the Aisin IFS hubs, go to 10 junkyards in my area (they all are in a three block radius) and there IS NOT ONE SET!!!
OK actualy there was ONE set, but someone destroyed the lockout on one because they didn't know to take off the cover and undo the snap ring just to get off a USED ROTOR!!!
The donor car was on a hill, right next to another car, and the other hub was buried in the sand. I dug it out, and someone stripped all of the allen bolts beyond all recognition.
That was an epic fail of a day
You lucky dog! So I go on a quest to get a pair of the Aisin IFS hubs, go to 10 junkyards in my area (they all are in a three block radius) and there IS NOT ONE SET!!!
OK actualy there was ONE set, but someone destroyed the lockout on one because they didn't know to take off the cover and undo the snap ring just to get off a USED ROTOR!!!

The donor car was on a hill, right next to another car, and the other hub was buried in the sand. I dug it out, and someone stripped all of the allen bolts beyond all recognition.
That was an epic fail of a day
#30
only ones I have ever seen have the 10mm bolts no allens. And whenever I see them I pick them up. sold the last set on here for $80 fair price for the work to get the cone washers off.
and I still have a trail spare.
and I still have a trail spare.
Thread
Thread Starter
Forum
Replies
Last Post
polo451
General Vehicle Related Topics (Non Year Related)
13
Nov 20, 2016 07:49 PM
HookahRoo
86-95 Trucks & 4Runners (Build-Up Section)
4
Jul 20, 2015 07:06 PM
scottyg486
Offroad Tech
3
Jul 19, 2015 05:34 PM
sojourner567
86-95 Trucks & 4Runners
2
Jul 16, 2015 08:52 PM




