Hey there. Does anyone have a clear pic of the passenger side of the intake plenum? My camera batteries were dead when I took mine apart and now it's been too long to remember. If it's in the FSM then I just can't find it. I have found the cold start injector and EGR and stuff......i just need proper locations for the vacuum line connections bolt in. Also...what would be the torque setting on that? I was going to just guess at 25 ftlb with a little blue thread locker to seal it up.

Thanks for any help,
Jason

 

what engine?

 

here's some for the 3VZE:

 

I should put all this info in my sig or something cuz I always forget to post it. It is for a 1993 Toyota 3VZE V6.

Thanks TNRabbit, that first pic is what I was looking for. I removed everyting from the intake plenum to have it cleaned up. Most things can only go one way, but these vacuum hoses get me a little nervous sometimes. I want it to fire right up once I get it back together. I hate searching for problems.

Thanks,
Jason

 

I've got some slightly different angles and closer uppers, if need be.

 

Other angles can always help. If you don't mind then post em up. If it's easier you could email me... jasond74 @ telus.net

Thanks for the help,
Jason