Hard to start when engine is cold
Apr 15, 2012 | 02:58 PM
#1
Thread Starter
Registered User
Joined: Apr 2012
Posts: 1
Likes: 0
From: Calgary Alberta
Hard to start when engine is cold
Hello everybody im a long time creeper and first time poster.
So my delema is that when i start the truck in the morning to go to work it takes about 5-6 secounds of cranking for it to fire up. I have done some poking around and have noticed that it has no fuel pressure after it has been sitting for a while...im not sure if this is normal or not. I have tested the AFM and TPS and they are both within spec according to the FSM. Also i have done a EGR delete and have replaced the fuel pressure regulator. Any insight in to this matter would be awesome....thanks in advance
So my delema is that when i start the truck in the morning to go to work it takes about 5-6 secounds of cranking for it to fire up. I have done some poking around and have noticed that it has no fuel pressure after it has been sitting for a while...im not sure if this is normal or not. I have tested the AFM and TPS and they are both within spec according to the FSM. Also i have done a EGR delete and have replaced the fuel pressure regulator. Any insight in to this matter would be awesome....thanks in advance
Apr 15, 2012 | 04:44 PM
#3
Thread
Thread Starter
Forum
Replies
Last Post
Team420
95.5-2004 Tacomas & 96-2002 4Runners
4
Jan 12, 2021 04:57 PM
FS[MidWest]: 1995 4Runner 5vz 4x4
vasinvictor
Vehicles - Trailers (Complete)
3
Jan 20, 2016 12:39 PM
jmc88runner
86-95 Trucks & 4Runners
3
Jun 18, 2015 03:39 PM
